I understand Cisco Prime and DNAC are different product. DNAC have modern features like SDx, assurance etc. They have some similarities, special if I compare prime features with DNAC. But some feature of prime are not present in DNAC like Compliance,...
We are in the process of building a SD Access lab. After doing the initial setup of DNA I added my CCO account and we upgraded from 1.3.x to 1.3.3.9. Now that we have some stability and a better understanding of how it bolts together etc I thought ...
Hi All,I am having C9800-L-C-K9 and trying to provision using pnp in DNAC center. WLC SERVICE PORT is connected to access layer switch via trunk. WLC got IP using DHCP and joined DNAC but when i try to claim device in PnP its not showing Interface to...
Does DNA Center officially support 9800 WLC pnp? I see the PnP agent messages on the console of a wiped 9800 WLC. I have option 43 configured and see the WLC in DNAC PnP console. However, when I try to claim the device, it always fails when "Loadi...
Good day all.DNAC will create the wireless policy tags under the cover. Does anyone know how to obtain the name of these policy tags before you even deploy a wireless controller and AP’s?Thanks.
Hi all,Is there any way that DNA can tell me which ports are statically configured (via DNA host onboarding) in a specific IP Pool?The reason for asking is that we have a large SDA deployment (several hundred switches) and we need to remove an IP poo...
Hi,We are currently in the middle of transforming the network and will eventually move across to SD-WAN / Access. At the moment we have a large amount of devices sat in APIC-EM for EasyQoS which is EOL and to be honest pretty sub-standard now especia...
I stumbled across the mobile app on Android and was looking at the preview screenshots. I'm assuming this application is for if you have a cloud instance (hence the name) but I'm curious if this can be used with an on-prem appliance or if there are ...
Is there any way to provide Throughput statistics of a switch network port that is controlled by DNA? I know you can show the TX/RX Utilisation but not the actual throughput. Lots of detail for individual devices but we have a requirement to monito...
Hi Guys,We have the mac flapping issue in daisy chaining for cisco access point 1572EAC.*Feb 12 16:30:17.959: %SW_MATM-4-MACFLAP_NOTIF: Host c4f7.d539.8fd0 in vlan 153 is flapping between port Gi1/1 and port Gi1/26*Feb 12 16:30:19.878: %SW_MATM-4-MA...
The customer ordered C9200L-48T-4G-E with C9200L-DNA-E-48-3Y subscription. They have an ask to extend the subscription to 48 months instead of 36 months. The system only has the minimum 3 year SKU "C9200L-DNA-E-48-3Y". Is there a way for an order to ...
Hi all,Our customer has an SDA fabric and we use LAN automation to provision new switches.In addition to the standard config that is applied during LAN automation (IPs, ISIS routing, AAA, etc), we have a requirement to apply custom configurations (SG...
Hi, Provisioned a switch(FIAB) in my LAB and then changed some configuration(added a DNS server on an IP Pool)I then reprovision the switch, but it gave me an error.When I click the details button I don't really get any information about where the er...
Hi All, Try to create API call to dnac : other API works fine , except Get Device Detail API, the API get device detail previously work a day before, but today failed. the error message is below :'executionId': '57315dfe-e7fe-428f-89eb-47d8f92fc917...
Hi guys, In DNAC, we can check a 'Guest Virtual Network' checkbox when adding a virtual network. Just wondering what kind of restrictions will be applied to end devices in guest virtual network if I check this option? For example can guest device pin...
