Cisco Catalyst Center

Resolved! Spanning Tree MSTP vs RSTP

Hello;I have a network diagram shown in the first image, which is consist of two regions, the first region includes multiple switches with a Cisco C4500X as core switch which has been deployed previously, currently the new region has been installed w...

No service advisories for ASR 1001X

Hi Guys,I was just wondering why DNA center is not showing me any security advisories for that particular router model... I can see advisories for ISR4331/K9ASR1001-X image is 17.6.5Also, what would be a good golden image to upgrade to?THanks!

Catalyst Center schedule SSID availability per site.

Hi! We would like to turn of specific SSID per site. We have about 700 sites and would like turn off the common Guestportal SSID for some of the sites in the night. Is this possible in any upcoming version of CatC?

DNAC PNP Assistance for new devices

Hi folks, just looking for some advice on the best way to provision new switches.... i'm not sure the way I am doing it is the most efficient, this process was designed when this site first implemented DNAC (for whatever reasons). The environment use...

Resolved! deploy a template to update domain name of all hostnames

HiIs it possible to deploy a template to update all domain hostnames of all Cisco devices?i.e. current are hostname.domain.netneed to change to: hostname.domain.intranetthanks!

Add Wireless AP to map in Catalyst Centre.

We are deploying an external wireless mesh lan and will be leveraging Catalyst Centre.How can I add access points to a site map so we can see where the AP's are located on the street for a support perspective.Seems to only support a floor map, which...

Cisco Catalyst 1300 Security White Paper and Security Recommendations?

Hi everyone,I have Cisco Catalyst 1300 series switch and I am looking to find a security white paper in which all active services, open ports and their purpose is documented. In addition, I want to find a document with cybersecurity recommendations f...

WOL issue with C9500

hello evryone, i have an issue with WOL on c9500 i have configured everything as shown and i am using Kaspersky as wol server with ip add 10.40.170.175 my problem is when i try to wake up the device did not respond but if i forced to turn it on an...

Resolved! Need to change a route in DNAC but getting an Error.

We have DNAC deploy but need to change a route as we cannot access DNA gui from a specific subnet.Running the maglev-config update I get an error / warning.Remove all NFS mount before network changes.Cannot find a process anywhere to sot this out. TI...

catalyst center adding a no ip domain name to my deployment template

Hi All,I dont have any other template having this command so I'm not sure why Catalyst is suddenly deciding to remove our domain name? THanks

applying a template to 3560cx; 9200cx adds a bunch of snmp en traps

applying a template to 3560cx (15.2.7.E6) and 9200cx (17.9.4a) automatically adds a bunch of enable traps that I did not configure in the template, other platform models do not have this issue c9300 and 3850sDo I need to upgrade to a different code v...

error message BPDU Port errdisabled

Hi Team,We have WS-C2960-48 with version 12.2(55)SE12. which is running with Ethernet uplinkWhile trying to move uplink from ethernet to fiber, after one minute port is disabling. log message is "Nov 28 20:36:22: %PM-4-ERR_DISABLE: bpduguard error de...

Assign ip address pool to Virtual_Network

Team, i am trying to assign IP address pool to Virtual network.. the ip address pool is not being listed when trying to map it to a VN DNAC version 2.3.5.6 Created Address pool under Global and then reserved it under a Site... (Design > Network setti...

C9400-SUP-1XL issue

Hello Gents, I have C9407-FAN that include 1 line card & 1 Supervisor, The C9400-SUP-1XL is not working and below what is happening: - Physical part: The supervisor led is blinking blue and not going green, -CLI part: Once I connect my self console i...