Hi Guys W're trying to figure out the settings for integrating DNAC with our ISE environment and keep hitting walls with it. Our ISE environment is setup with ISE01 (PAN), ISE02 (Primary Monitoring) and ISEPX (Just PXGrid). They all have sightly diff...
Is it possible to move assigned devices to another building/floor/site, or do they have to be deleted from inventory and rediscovered? When I try to assign a site to a device that is already assigned, the location is grayed out and cannot be modified...
Hello, wondering if anyone has experienced a similar problem to this and is able to offer any advice. I have attempted to automate the deployment of a catalyst 9300 switch using DNA Center. The automation starts successfully and the device is claime...
when trying to download RCA file in DNAC using SCP, it appears that access is denied, is there a default password for accessing DNA center using SCP?Please suggest any configuration changes. I followed the following stepshttps://www.cisco.com/c/en/us...
if we need to apply policy between users at fabric and data center servers and need to enforce this policy at fusion router or fusion switch so we will do inline tagging between border and fusion to make fusion learn source SGT and do static ip-to-sg...
Hello, Is there any way to automate port assignment by python? When I add new switches to the fabric I have to click on hundreds of ports and assign them to appropriate data ip pool, voice ip pool and authentication template. It isn't look like a con...
Catalyst 9300 series wireless access points require DNA license. I understand it is mandatory.I have few spare AP DNA licenses. Can I order 9300 Wireless AP only, i.e., without DNA subscription since I already have it?. I purchased DNA licenses sepa...
Hello i'v trying to uppgrade och wan access routers, cisco 891 anf cisco 891F and everything works but scp when DNA should copy the file to the router.my DNA server has x.x.255.10 local address, but the error message says different se below Unable to...
After pushing my DayN template to my 9200 switch I receive a partial collection error in the DNA inventory. DNA is unable to SSH into the newly configured switch. What configurations are necessary for DNA center to communicate through the Management ...
When we first started using PnP to push configs the whole process was less than 5 minutes. Now provisioning a single switch is taking about 30 minutes. I have checked the metrics of the controller-server appstack ndp and the memory usage is at 98%. I...
Hi, I'd like to create configuration (day-n) templates with some multiline commands. The <MLTCMD> doesn't provide me the correct output for:- interface macro's- banners (containing some special characters ($,"(),#,-) I tried #INTERACTIVE mode, but th...
Hello Everyone,I am looking for Centralized DNAC deployment for Assurance purposes for now and Sd-Access in near future. We have multiple sites and each site has 2000+ endpoints and 50 network devices. Sites are connected over IPsec with 50-70ms late...
Hello DNA Center experts I was wondering whether I can use the DNA Center appliance as a generic SFTP server? In 1.3.3.6 I can see the option below but I don't recall configuring the sftpuser credential, and how would I change it anyway? What is th...
Hi everyone there is some confusion on the net about the difference between modem and csu / dsu. One thing is for sure they both perform the same function ie convert a used signal into local broadcasts for a long distance signal. And even on the inte...
Hi We have provisioned some of our existing wlc`s into DNA. And have had some problems around our voice setup. Our existing WLAN setup had CCKM enabled for old 7925 cisco iphones. However the CCKM option is nowhere to be found in DNA, so in order to ...
