From the link: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-7/segment-routing/configuration/guide/b-segment-routing-cg-asr9000-77x/configure-sr-te-policies.html#id_73028we can implement SRv6 explicit path in the 7.7.1 versi...
Now that SDWAN manager loads in CML,connection to it whether using pat (after having configured it in cockpit): export MANAGER_IP='pat:2002'or whether a new IP is used : export MANAGER_IP='192.168.1.41'never works (attempt 27 and counting...) :Trying...
Hi there,I am new to CML and I just finished installing it on my server. I was wondering, how can I add the supplementary refplat iso to CML 2.8 so I can access SDWAN and firepower images? Any help will be greatly appreciated, thanks.
So i have the CML free tier deployed in proxmox and it works fine, but sometimes after some idle time, i think, it says 'server disconnected'. When i reboot the vm, it doesn't work. After some time though, it does go back to 'OK'.How do i resolve thi...
Hello,I have a powerful laptop with CML 2.8 installed.When I stumbled upon the video : Build your own Cisco Catalyst SD-WAN Virtual Lab with free Lab Deployment Tool in CML - YouTube and another one : Easy SD-WAN in CML with catalyst-sdwan-lab -with...
I have a strange problem where a Nexus 9000v VM is missing the feature nv overlay command. I have other N9Kv's in the same virtual topology running fine, but this specific one is missing the command from the cli parser:N9Kv-2# show ver | in 10\.NXOS:...
Hello,I use the Break Out Tool in CML 2.8. It seems like there is a bug in this version. If I set up a session with telnet via the command line or with the app Secure CRT, and I then disconnect the session, the session with the Break Out Tool is abru...
Olá, bom dia! Por favor, gostaria de uma ajuda. Não estou conseguindo importar o arquivo .ova CSE-LABVM ; quando vou importar o appliance ocorre o erro descrito E_INVALIDARG (0X80070057). Não consigo importar o CSE-LABVM para o Virtual Box
Hello Everyone,I use CML on Vmware esxi. I want to send rspan packets to external IDS via external connectors. But I couldn't be successful about that. I configured the second bridge interface on CML and also configured this interface on VMware with...
Hello All,Does anyone have any idea what would cause the ASAv (v9.20.2) that came with CML to *not* want to start? I even tried these versions: v9.20.2, v9.20.3.7, v9.20.3.10, v9.22.1.1.Here's the environment OS: sysadmin@cml-controller:~$ uname -a L...
has anyone been able to convert and use CML in Hyper-Vmy Dell laptop does not support VT-x which I cant believe, the Intel CPU does, however my Alienware and Inspiron laptops both do not support virtualization. I was able to install workstation pro ...
HiI configured a simple lab, dhcp server is on R1, dhcp snooping is at SW2 on vlan 1, insertion of option 82 is enabled (see a quote from config and screen shots below). However dhcp discover message goes as usual and SW1 do not drop it in the untrus...
I recently rebuilt my CML Personal 40 Node VM and once I’d installed everything and imported my node images I noticed my Licensing was still flagging for a ‘System Error’. Once I entered Licensing I was prompted to choose my CML product. I choose the...
Hello Community, According to the CML 2.7.2 Installation Guide ESXi 6.5 and later are supported hypervisors. I am running ESXi 6.5 on a Gen 7 Proliant DL380. Every single time I try to create the CML 2.7.2 VM from the CML 2.7.2 .ova I get two specifi...
Apologies in advance, I am not strong with Linux at all. I installed the CML free tier version and I was able to see all the files on the server through Terminal on the CML Cockpit. I could do a "ls -D/*" and it would list everything on the server...
