Cisco Software Discussions

Little lost at what info I am missing to make this connection work.I have my main office site and just set up 2 switches and APs with support via the CBD. all worked as it came out the box, some tweeks and learning but very intuitive and working fine...

Does CISCO downloads diagnostics by default for a new client?

Just upgraded CISCO AMP client from version 6.2.3.10814 to version 6.3.5.11152. Have had reports during testing that some computers have had to reboot 3 times after the upgrade. Know that we have skipped a few versions of the updates to CISCO AMP cli...

When doing guestshell enable I am getting:Error: Config DB Appid guestshell: Default (Port 1) is not allowedThe router I am using is is a Cisco ISR 4400 version 17.06.02Show iox-service:IOx service (CAF): runningIOx service (HA): not supposed IOx ser...

I've been directed to publish Webex seamlessly through a Citrix session.It looks alright until you close the app.  Then a headless session lingers for the user with Webex processes running in the background.So far I've identified the following:CiscoC...

Hi All,I have a problem about SSH Buffer on Cisco-9200L switch. I can access to switch via ssh on tacacs, but we use Delinia PAM. So I can't access to switch from Delinia. I have encountered this error message on switch. '%SSH-3-BUFF_GET_FAIL: Tried ...

I encountered difficulties while attempting to pre-download the backup image for the access point (model: air-cap1532i-a-k9) from a Cisco 5500 series wireless controller. The access point is running Cisco IOS Software, specifically version 15.3(3)JC1...

According to https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/nx-os-software/guide_c07-658595.html#TypesofCiscoNXOSSoftwarereleases the part in brackets - "99w" and "99x" in these releases is supposed to be sequantial release numb...

Hi everyone!I've been at a MSP for about 4 years now and I over see most of network infrastructure for clients. I came from a large enterprise that was a Cisco shop, since I was pretty new when I worked at this larger corporation I never got into the...

Recently our higher changed the name of our DC's and didn't let us know until after the fact.  As a result we are not able to log into our On-Prem server.  "Your username and/or password does not match our records, kindly try again. If the problem pe...

The Cisco ise services are failing to start. I have tried multiple times of start/stopping the application and even reboots.I think this is causing the database server not to start. It is a VM with 12 CPUs. Anyone run into this issue ? from ADE.log -...

Hello everyone, I am using an Extron SW2 HD 4K Switcher in an office with a Cisco Webex Room Kit. I have an Apple TV and HDMI Connection going to the Extron to the Kit. When I plug in my HDMI Cable when switching over to the new signal, the kit shows...