The call classification on Webex Calling determines whether a call is originating from an on-net source like on-premise PBX or from the PSTN, the concept is similar to Offnet and Onet Classificatio...
Join the ranks of some of the best, brightest, and most passionate technologists. The 2024 Cisco Champion application is now open. Apply by January 12, 2024.
As a Cisco Champion, you will:
Get early ...
In Webex Calling the routing behavior for unknown numbers is controlled by two settings. The enterprise level “Unknown Number Handling” setting and the “Calls to On-Premises Extension” setting at the ...
Webex Calling Call Routing Components
In CUCM a route pattern is a string of numbers that CUCM uses to determine where to route calls. The call can be either inter-site to another Cisco UCM Cluster o...
NAT Reflection is a method that allows communication of internal PCs to access DMZ Server using the Public IP Address of the server instead of the Private IP Address. One of the common use case is Cis...
On Cisco Unified CM, multiple points and levels are availables to do Digits Manipulation, offering more granularity and flexibility, especially for outbound calls, the Called or the Calling parties ca...
Cisco Meeting Server upcoming new version 3.8 BETA soon. In this release, Cisco Meeting Server introduces adding a logo in custom and standard screen layouts and applying pane placement in custom layo...
Integrating a Local Gateway for Webex Calling with an existing On-premise Cisco Unified CM involves the use of the Voice Class URI on the Local Gateway for inbound dial peer matching for calls coming...
In a Multisite Deployment with overlapping site extension ranges, it is recommended to implement Inter-Site Dialing using access code and site code, then users dial an access code followed by a site c...
When migration from On-premise Call Control Cisco Unified CM to Webex Calling, you can facing a situation where some users are registered to Webex Calling while others in the same location are registe...
To route calls to on-premises extension with existing on-premise Call Control, Webex Calling uses the Dial Plan feature. Similar to Route Pattern on CUCM, Dial Plan is a Set of Dial Patterns that repr...
If you plan on attending tomorrow's AMA session on Calling in the Webex app, please complete a brief survey. We value your input and want to ensure that the discussion is tailored to your interests.
The "Verify Call Routing" Feature in Webex Calling Control Hub is similar to the DNA "Dialed Number Analyzer" on Cisco Unified CM On-prem control.Like the DNA, the "Verify Call Routing" Feature on Con...
The deployment consists of one Cisco UCM Cluster and one Cisco CMS Cluster distributed accross three sites, US, UK and GE. In this type of deployment, there are some recommendations that should be tak...