Cisco Documents are usually accurate, but when it came to the document on Cisco APIC Signature-Based Transactions it was slightly off the mark. This document is for those novices to API like me who cant seem to figure out how to go about performing signature based transactions on APIC.
1. Generate a RSA Private Key and create a X.509 Certificate
We have a pair of NEXUS 93180LC-EX switches in a NX-OS setup.They act as the core and have multiple VLAN's with HSRP enabled.We had a single DHCP relay agent enabled and that was working fine. The problem we are seeing is when we tried to upgrade and...
Hello All,I am looking for a simple logical reasoning behind a small thing that has been troubling me.Please refer to attached diagram to better understand this situation. I am going to ping PC-2 from PC-1 in different subnets and VLANs, with a proper rou...
We have some Nexus 9k and a DCNM, where the Nexus 9k are loaded in an external type Fabric. The Fabric is only used for monitoring the Nexus 9k (read only). Nexus 9k are managed with CLI commands.I need to know if it is possible to manage the Nexus...