Cisco UCS B-series blade servers sits inside the UCS chassis and are managed by UCS manager running on Fabric Interconnect. Cisco UCS C-series rack server are independent 1RU or 2RU size servers, which can be independently managed or via UCS FI.
UCS Blade Server vs Rack Server
The following table lists the differences between the Blade Servers and Rack Servers:
Hello, I did a home connection using a wireless router and client. I have a wireless router, 2 desktop computers, a laptop with a wireless interface card, a television, a cable modem and a cable splitter.I have done all the configurations. I con...
We are looking to replace one Juniper QFX5200, Broadcom Tomahawk based switch with two 93180YC-FX/FX3 switches.On this Juniper switch, there is a GRE tunnel providing IPv4 and IPv6 transport, also running OSPF and OSPFv3. From Cisco Nexus 9000 N...
According to the whitepaper below
"...needs Cisco CSR 1000V Series routers in each region for traffic...
I am little curious about the vPC management design for Peer Keepalive Link.
According to the following URL which is traditional Nexus7000 Series vPC Best Practices.
Best Practices for Virtual Port Channels (vPC) on Cisco Nexus 700...
I have been reading vaious Cisco documents about ACI Hybrid Cloud setup (for Azure or AWS). However I am kind of confused from one doc to another. Here below are some confusing points hope someone could help clearify.
Whether using raw Internet OR ...