9222
Views
1
Helpful
0
Comments
Options
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
01-24-2014
03:50 PM
This document was generated from CDN thread
Created by: Jeremy Waldrop on 04-04-2012 06:06:32 AM
Hey all, I have been working with the UCS PowerShell toolkit in the lab and have come up with a version 1 of a healt check report. It has HTML tabs for inventory, configuration, faults and environmental stats. The script also has email support.
I have attached both the PowerShell script and an example of the output.
Subject: RE: UCS Health check HTML Report
Replied by: Jeremy Waldrop on 10-05-2012 09:11:09 AM
Updated version that fixes some typos and added a section for the Fabric Interconnects on the inventory tab. I also have incorporated the latest version of 0.98 that allows for the module import without the full path. I changed the way I am handling multiple UCS clusters, I am now using an array that makes it easier to add/remove UCS clusters.
Subject: RE: UCS Health check HTML Report
Replied by: pacer international on 23-08-2012 05:19:42 AM
hey i have downloaded the script, but it isn't working fine. when i ran the script it gave me page full of errors. Please help me. Do i need to change anything apart from specifying IP Add, user name and Passwords.
Subject: RE: UCS Health check HTML Report
Replied by: Jeremy Waldrop on 23-08-2012 07:22:20 AM
hey, here are some things to try
Make sure you have the latest version of the UCS Power tool kit
Make sure you have set the powershell execution policy to remotesigned
Make sure you can run the Cisco UCS Power Tool short cut and can connect to UCS "connect-ucs ipaddressof ucsm"
Subject: RE: UCS Health check HTML Report
Replied by: Upul asanka Edirisinghe on 12-12-2012 12:35:36 AM
No attachements. Pls check.
Subject: RE: UCS Health check HTML Report
Replied by: sushil kumar on 24-12-2012 09:11:37 AM
Hi Jeremy
I downloaded the script from the Drop box URL you provided on your personeel blog. Where as i can connect to UCS instance manually and fetch the data Using Get-UCS command manually , i was unable to see anything via your script. All is get is HTML file, listing various tabs but no data.
Is it so that this ver of script is tied to UCSM 1.4 or some other version. I am running 2.0 (1 W)
Regards
Sushil
Subject: RE: New Message from sushil kumar in Unified Computing UCS Manager - Micros
Replied by: Jeremy Waldrop on 24-12-2012 11:41:09 AM
The script works with any version of UCSM. Did you set your PowerShell execution policy to remotesigned? You could also try this; Launch the Cisco Power tool shortcut and the from in the PowerShell window go to the directory where the script is located and run it from there.
From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Monday, December 24, 2012 10:12 AM
To: cdicuser@developer.cisco.com
Subject: New Message from sushil kumar in Unified Computing UCS Manager - Microsoft Discussions: RE: UCS Health check HTML Report
sushil kumar has created a new message in the forum "Microsoft Discussions": -------------------------------------------------------------- Hi Jeremy
I downloaded the script from the Drop box URL you provided on your personeel blog. Where as i can connect to UCS instance manually and fetch the data Using Get-UCS command manually , i was unable to see anything via your script. All is get is HTML file, listing various tabs but no data.
Is it so that this ver of script is tied to UCSM 1.4 or some other version. I am running 2.0 (1 W)
Regards
Sushil
--
To respond to this post, please click the following link: or simply reply to this email.
Subject: Re: New Message from Jeremy Waldrop in Unified Computing UCS Manager - Micr
Replied by: sushil kumar on 27-12-2012 03:44:09 AM
Perfect .
Looks like i was not setting the policy to remote signed. Just did it and
was able to generate a Nice 1,2 MB remote. Just as i was expecting it.
Regards ,
Sushil Kumar ,
ATS, CSC
Aerodynamics are for people who can’t build engines. – Enzo Ferrari
Leave Notification : -
CSC • This is a PRIVATE message. If you are not the intended recipient,
please delete without copying and kindly advise us by e-mail of the mistake
in delivery. NOTE: Regardless of content, this e-mail shall not operate to
bind CSC to any order or other contract unless pursuant to explicit written
agreement or government initiative expressly permitting the use of e-mail
for such purpose • Computer Sciences Corporation India Pvt Ltd • 7th,
Floor, Block 1B, DLF IT Park, Sivaji Garden, Nandambakkam Post, Ramapuram,
Chennai-600 089.
From: Cisco Developer Community Forums <cdicuser@developer.cisco.com>
To: "cdicuser@developer.cisco.com" <cdicuser@developer.cisco.com>
Date: 12/24/2012 11:11 PM
Subject: New Message from Jeremy Waldrop in Unified Computing UCS
Manager - Microsoft Discussions: RE: New Message from sushil
kumar in Unified Computing UCS Manager - Micros
Jeremy Waldrop has created a new message in the forum "Microsoft
Discussions":
-------------------------------------------------------------- The script
works with any version of UCSM. Did you set your PowerShell execution
policy to remotesigned? You could also try this; Launch the Cisco Power
tool shortcut and the from in the PowerShell window go to the directory
where the script is located and run it from there.
From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com
]
Sent: Monday, December 24, 2012 10:12 AM
To: cdicuser@developer.cisco.com
Subject: New Message from sushil kumar in Unified Computing UCS Manager -
Microsoft Discussions: RE: UCS Health check HTML Report
sushil kumar has created a new message in the forum "Microsoft
Discussions":
-------------------------------------------------------------- Hi Jeremy
I downloaded the script from the Drop box URL you provided on your
personeel blog. Where as i can connect to UCS instance manually and fetch
the data Using Get-UCS command manually , i was unable to see anything via
your script. All is get is HTML file, listing various tabs but no data.
Is it so that this ver of script is tied to UCSM 1.4 or some other version.
I am running 2.0 (1 W)
Regards
Sushil
--
To respond to this post, please click the following link: or simply reply
to this email.
--
To respond to this post, please click the following link: or simply reply
to this email.
Subject: RE: UCS Health check HTML Report
Replied by: Rafael Monteiro on 28-03-2013 02:54:48 AM
Hello,
I'm very interested on your script; I need to report every morning a status of our UCS infrastructure
Where can I find the script?
Subject: Re: New Message from Rafael Monteiro in Unified Computing UCS Manager - Mic
Replied by: sushil kumar on 28-03-2013 03:00:51 AM
Here is The Script for you
(See attached file: UCS-HealthCheck-v4.txt)
Regards ,
Sushil Kumar ,
From: Cisco Developer Community Forums <cdicuser@developer.cisco.com>
To: "cdicuser@developer.cisco.com" <cdicuser@developer.cisco.com>
Date: 03/28/2013 01:25 PM
Subject: New Message from Rafael Monteiro in Unified Computing UCS
Manager - Microsoft Discussions: RE: UCS Health check HTML
Report
Rafael Monteiro has created a new message in the forum "Microsoft
Discussions":
-------------------------------------------------------------- Hello,
I'm very interested on your script; I need to report every morning a status
of our UCS infrastructure
Where can I find the script?
--
To respond to this post, please click the following link: or simply reply
to this email.
Subject: RE: New Message from Rafael Monteiro in Unified Computing UCS Manager - Mic
Replied by: Jeremy Waldrop on 28-03-2013 05:27:51 AM
I have updated the script since I put it out on the dev community forum. You can get the updated scripts from my dropbox here - https://www.dropbox.com/sh/i001giq6jx67fl2/GYedBaqAYa
From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Thursday, March 28, 2013 3:55 AM
To: cdicuser@developer.cisco.com
Subject: New Message from Rafael Monteiro in Unified Computing UCS Manager - Microsoft Discussions: RE: UCS Health check HTML Report
Rafael Monteiro has created a new message in the forum "Microsoft Discussions": -------------------------------------------------------------- Hello,
I'm very interested on your script; I need to report every morning a status of our UCS infrastructure
Where can I find the script?
--
To respond to this post, please click the following link: or simply reply to this email.
Created by: Jeremy Waldrop on 04-04-2012 06:06:32 AM
Hey all, I have been working with the UCS PowerShell toolkit in the lab and have come up with a version 1 of a healt check report. It has HTML tabs for inventory, configuration, faults and environmental stats. The script also has email support.
I have attached both the PowerShell script and an example of the output.
Subject: RE: UCS Health check HTML Report
Replied by: Jeremy Waldrop on 10-05-2012 09:11:09 AM
Updated version that fixes some typos and added a section for the Fabric Interconnects on the inventory tab. I also have incorporated the latest version of 0.98 that allows for the module import without the full path. I changed the way I am handling multiple UCS clusters, I am now using an array that makes it easier to add/remove UCS clusters.
Subject: RE: UCS Health check HTML Report
Replied by: pacer international on 23-08-2012 05:19:42 AM
Hey all, I have been working with the UCS PowerShell toolkit in the lab and have come up with a version 1 of a healt check report. It has HTML tabs for inventory, configuration, faults and environmental stats. The script also has email support.
I have attached both the PowerShell script and an example of the output.
hey i have downloaded the script, but it isn't working fine. when i ran the script it gave me page full of errors. Please help me. Do i need to change anything apart from specifying IP Add, user name and Passwords.
Subject: RE: UCS Health check HTML Report
Replied by: Jeremy Waldrop on 23-08-2012 07:22:20 AM
hey, here are some things to try
Make sure you have the latest version of the UCS Power tool kit
Make sure you have set the powershell execution policy to remotesigned
Make sure you can run the Cisco UCS Power Tool short cut and can connect to UCS "connect-ucs ipaddressof ucsm"
Subject: RE: UCS Health check HTML Report
Replied by: Upul asanka Edirisinghe on 12-12-2012 12:35:36 AM
No attachements. Pls check.
Subject: RE: UCS Health check HTML Report
Replied by: sushil kumar on 24-12-2012 09:11:37 AM
Hi Jeremy
I downloaded the script from the Drop box URL you provided on your personeel blog. Where as i can connect to UCS instance manually and fetch the data Using Get-UCS command manually , i was unable to see anything via your script. All is get is HTML file, listing various tabs but no data.
Is it so that this ver of script is tied to UCSM 1.4 or some other version. I am running 2.0 (1 W)
Regards
Sushil
Subject: RE: New Message from sushil kumar in Unified Computing UCS Manager - Micros
Replied by: Jeremy Waldrop on 24-12-2012 11:41:09 AM
The script works with any version of UCSM. Did you set your PowerShell execution policy to remotesigned? You could also try this; Launch the Cisco Power tool shortcut and the from in the PowerShell window go to the directory where the script is located and run it from there.
From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Monday, December 24, 2012 10:12 AM
To: cdicuser@developer.cisco.com
Subject: New Message from sushil kumar in Unified Computing UCS Manager - Microsoft Discussions: RE: UCS Health check HTML Report
sushil kumar has created a new message in the forum "Microsoft Discussions": -------------------------------------------------------------- Hi Jeremy
I downloaded the script from the Drop box URL you provided on your personeel blog. Where as i can connect to UCS instance manually and fetch the data Using Get-UCS command manually , i was unable to see anything via your script. All is get is HTML file, listing various tabs but no data.
Is it so that this ver of script is tied to UCSM 1.4 or some other version. I am running 2.0 (1 W)
Regards
Sushil
--
To respond to this post, please click the following link: or simply reply to this email.
Subject: Re: New Message from Jeremy Waldrop in Unified Computing UCS Manager - Micr
Replied by: sushil kumar on 27-12-2012 03:44:09 AM
Perfect .
Looks like i was not setting the policy to remote signed. Just did it and
was able to generate a Nice 1,2 MB remote. Just as i was expecting it.
Regards ,
Sushil Kumar ,
ATS, CSC
Aerodynamics are for people who can’t build engines. – Enzo Ferrari
Leave Notification : -
CSC • This is a PRIVATE message. If you are not the intended recipient,
please delete without copying and kindly advise us by e-mail of the mistake
in delivery. NOTE: Regardless of content, this e-mail shall not operate to
bind CSC to any order or other contract unless pursuant to explicit written
agreement or government initiative expressly permitting the use of e-mail
for such purpose • Computer Sciences Corporation India Pvt Ltd • 7th,
Floor, Block 1B, DLF IT Park, Sivaji Garden, Nandambakkam Post, Ramapuram,
Chennai-600 089.
From: Cisco Developer Community Forums <cdicuser@developer.cisco.com>
To: "cdicuser@developer.cisco.com" <cdicuser@developer.cisco.com>
Date: 12/24/2012 11:11 PM
Subject: New Message from Jeremy Waldrop in Unified Computing UCS
Manager - Microsoft Discussions: RE: New Message from sushil
kumar in Unified Computing UCS Manager - Micros
Jeremy Waldrop has created a new message in the forum "Microsoft
Discussions":
-------------------------------------------------------------- The script
works with any version of UCSM. Did you set your PowerShell execution
policy to remotesigned? You could also try this; Launch the Cisco Power
tool shortcut and the from in the PowerShell window go to the directory
where the script is located and run it from there.
From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com
]
Sent: Monday, December 24, 2012 10:12 AM
To: cdicuser@developer.cisco.com
Subject: New Message from sushil kumar in Unified Computing UCS Manager -
Microsoft Discussions: RE: UCS Health check HTML Report
sushil kumar has created a new message in the forum "Microsoft
Discussions":
-------------------------------------------------------------- Hi Jeremy
I downloaded the script from the Drop box URL you provided on your
personeel blog. Where as i can connect to UCS instance manually and fetch
the data Using Get-UCS command manually , i was unable to see anything via
your script. All is get is HTML file, listing various tabs but no data.
Is it so that this ver of script is tied to UCSM 1.4 or some other version.
I am running 2.0 (1 W)
Regards
Sushil
--
To respond to this post, please click the following link: or simply reply
to this email.
--
To respond to this post, please click the following link: or simply reply
to this email.
Subject: RE: UCS Health check HTML Report
Replied by: Rafael Monteiro on 28-03-2013 02:54:48 AM
Hello,
I'm very interested on your script; I need to report every morning a status of our UCS infrastructure
Where can I find the script?
Subject: Re: New Message from Rafael Monteiro in Unified Computing UCS Manager - Mic
Replied by: sushil kumar on 28-03-2013 03:00:51 AM
Here is The Script for you
(See attached file: UCS-HealthCheck-v4.txt)
Regards ,
Sushil Kumar ,
From: Cisco Developer Community Forums <cdicuser@developer.cisco.com>
To: "cdicuser@developer.cisco.com" <cdicuser@developer.cisco.com>
Date: 03/28/2013 01:25 PM
Subject: New Message from Rafael Monteiro in Unified Computing UCS
Manager - Microsoft Discussions: RE: UCS Health check HTML
Report
Rafael Monteiro has created a new message in the forum "Microsoft
Discussions":
-------------------------------------------------------------- Hello,
I'm very interested on your script; I need to report every morning a status
of our UCS infrastructure
Where can I find the script?
--
To respond to this post, please click the following link: or simply reply
to this email.
Subject: RE: New Message from Rafael Monteiro in Unified Computing UCS Manager - Mic
Replied by: Jeremy Waldrop on 28-03-2013 05:27:51 AM
I have updated the script since I put it out on the dev community forum. You can get the updated scripts from my dropbox here - https://www.dropbox.com/sh/i001giq6jx67fl2/GYedBaqAYa
From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Thursday, March 28, 2013 3:55 AM
To: cdicuser@developer.cisco.com
Subject: New Message from Rafael Monteiro in Unified Computing UCS Manager - Microsoft Discussions: RE: UCS Health check HTML Report
Rafael Monteiro has created a new message in the forum "Microsoft Discussions": -------------------------------------------------------------- Hello,
I'm very interested on your script; I need to report every morning a status of our UCS infrastructure
Where can I find the script?
--
To respond to this post, please click the following link: or simply reply to this email.
Labels:
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.