Hi All, Please can someone share a guide / configuration on how to stretch a L3 VLAN between 2 sites, that both have just a VPC pair of Nexus switches. Each site has a L3 link between corresponding Nexus switches in each pair. I have successfully con...
Forum Posts
We have two site connected using two layer 2 links. one is 10G and the other is 1G. We wanted to configure port channel on the links. Please assist if there is a way to do that.
we are having Cisco Nexus N5K-C5596UP NX-OS running ver 6.0 (2) N(1), I would like to upgrade to 7.3 (15)N1 , Please help me if i can't directly upgrade to 7.3(15)N1 or there are incremental upgrade in between the path from 6.0(2)N(1) to 7.3 (15)N1, ...
Helloi have 10 Nexus 5672 switch , all same version of IOS with blank config, while 7 pcs boots and acts normally, other 3 pcs are too slow , it takes more than 15 minutes to boot , also after bootup, entering a write mem command take almost one minu...
Hello, Does anyone know about Slider rails Specifications in NXK-ACC-KIT-1RU?
customer has a Nexus 9504 with Dual Supervisors and needs to do an upgrade with minimal disruption as it is their Core Switch. In reading documentation I am disappointed that ISSU is not a supported option. Is there a process where we can upgrade th...
Hello, i already have a multipod environment, and therefore an IPN network including a vrf that provides the pod-to-pod communication. when i now insert a remote leaf is it best practice to use the existing VRF to provide commincaiton between spine a...
hello, In our DC we've used the Nexus9000 C9372PX Switches. Now we have some of these: Nexus9000 93180YC-EX. Everything seems ok, but C9372PX had Qos command issued: hardware qos ns-buffer-profile burst. 93180YC-EX doesn't have that Qos. Seems like...
Hi, when deploying a remote leaf i need to generate a L3out from SPINE to IPN. if i already have a multipod environment i already have this connection on vlan 4 from spine to ipn. i guess for the remote leaf i can reuse it? or do ie need to provide a...
Resolved! N5K fex switch places and number
Hi, does anyone done with two fex switching change places and number?For example:I got two fex model: N2K-C2348UPQ & N2K-C2232PP, these two model was separate in different racks,Nexus-5696# show fexFEX FEX FEX ...
I would like to know how much of the topics of CCIE Datacenter could be practiced in virtual environment.Some platforms like UCS and ACI have simulators but they do not have any data plane and the are very limiting. Also, for other features I would l...
I need to force multicast traffic into a layer 2 Nexus 5500 switch port. This is for diagnostic purposes. I believe the igmp membership reports of downstream multicast clients are being blocked. How can I force this multicast traffic into a layer 2 N...
Hi I prepare a CCW document for N9K-C93180YC-FX3 switch. There are I consider term based license for 03 years. Now I want make renewal list price for only 4th year. How I can prepare an renewal list price document for only 4th year? I used this PID C...
when i order a nexus 9k-fx3 model i have a default option where 32 Gig of memory are inserted. NXK-MEM-32GBwhat is the purpose for that option? is it mandatory for ACI? br + thx
hello, I would be grateful for any feedback on the design.I wonder if I might ask your advice on the following: I have two N9K-C9332D-GX2BX in two separate rooms, which are interconnected with OM4.I believe the best solution would be to use a QDD-400...
