Configure MAC authentication in ISE and SWITCH

[Electronic20]

Hello Community,

They could share a configuration template to configure MAC authentication on the c9200-48p switch ports and a configuration format for the ISE for MAC authentication.

I thank you very much for the information mentioned.

[hemohemoh]

Hi @Electronic20,

Wonder if this can help: Configuring MAC-Based Authentication on a Switch - Cisco

Cheers! 

[MHM Cisco World]

you admin the ISE or SW?
you need only the config of SW?

MHM

[Electronic20]

Hi @MHM Cisco World 

We would like to know how to configure both switches and ISE regarding MAC authentication.

[MHM Cisco World]

it look steps check this video, in min22 there is how you can config SW for MAB
NOTE:- the config of SW use new model of dot1x if you use legacy please mention that I will send to you SW config 
MHM

https://www.youtube.com/watch?v=PRlLDhbljIE

[balaji.bandi]

Look at the below Wired and wireless deployment : (configuration on the switch alone not get the function correctly, ISE also required configuration to achieve this)

https://community.cisco.com/t5/security-knowledge-base/ise-secure-wired-access-prescriptive-deployment-guide/ta-p/3641515

Video help easy :

https://www.youtube.com/watch?v=nXHK1fKfLBM