C9500 does not have the AppGigabitEthernet interface for IOx apps, so it is slightly different from C9300. All the examples I have found on Cisco documents/blogs relating to IOx containers on C9500 only point to using management network for connectiv...
Forum Posts
DEAR ALL IS THERE AN IOX APP FOR HOSTING A WEBSITE ON THE ISR 4331 ROUTER ?IF NOT CAN IT BE MADE ?
Question regarding C9000 application hosting: is Catalyst 9000 capable of running other applications besides Docker? Trying to find a better platform for developing IR800 series IOX applications. IR800 series is very limited. Can I use the C9000 for...
The Kinetic GMM APIs /v2/fog_installations/{id} allows to change specific application parameters before starting an IOx app. What development needs to be done to read these parameters in an IOx python applications built with docker?I already followed...
When building an IOx app using Docker and ioxclient, the app gets an internal IP address automatically 172.17.0.X. I need to make a connection to an IP address 192.168.0.xxx on port 502 using the Ethernet port GE1 of an IR809. in my configuration I d...
Hello everybody,today I installed the newest IOS for the IR1101 and the remote Docker support is finally here.I managed to get it working just by following the instructions on the iOX local manager and it is AWESOME.It is so much easier to deploy, te...
I'm trying to use the base image found at: iox-docker/ir800/base-rootfs/yocto-2.1.1/ , since it includes python3 support. Python2 is not an option; I need to use python requests module. The python2 compiled in the yocto1.7 image does not include co...
While attempting to perform a bundle install upgrade from ir800-universalk9-bundle.SPA.159-3.M1.bin to ir800-universalk9-bundle.SPA.159-3.M2.bin, one of my modems failed and is now in ROMMON-1. I have tried the rommon recovery procedure as described...
is there a way to tell a docker container to use a serial device in the IR829?I know that a typical Docker container can be granted serial device access with "docker run --device=/dev/ttyS3 ..."But how do I tell to the ioxclient/local manager to gran...
I have developed a IOX docker application and tried uploading in Sandbox, which is uploaded and running successfully,But when i try the same application uploading in the Hardware IR829, i am getting No space error,When i checked in sandbox after uplo...
Hi, I have a Cisco IR1101 and Cisco IR829WG. In both cases, I want to deploy containers with my application. For the IR1101, I used the instructions:https://www.cisco.com/c/en/us/support/docs/routers/1101-industrial-integrated-services-router/21438...
Okay, i'll try to make this clear as possible. I've set up several open service containers successfully, now i'm trying to convert some of it to IOx if possible. I know my VirtualPortGroup 0, 1 and 2 connections route properly out of my router sinc...
Hi,I am following the guide "IR829 PaaS and Container Style Applications Deployment Guide". There is a link to download the ioxclient tool there (http://bgl-ads-1313.cisco.com:9000/iox/ioxclient-xc_old_packaging_format/snapshot/linux_amd64/ioxclient)...
Hi, Cisco IOx sounds really promising and exciting but doing some researches, I have found a lot of blogs saying that in addition to the Cisco Connected Grid Routers, CGR1120 and CGR1240, Cisco added IOx support to 16 other Cisco platforms, including...
Hi guys, I have a temperature sensor that supports RS-485 and requires to connect to IR829 Serial 0.Can I directly use an ethernet cable(Cat5) to connect the sensor with s0 port, (like sensor pin 485+ 485- connect to RJ45 pin 1&2)or need a converter ...
