Quick Reference: Cisco IE5000 IRIG-B Support Cisco Industrial Ethernet 5000 series switches (IE 5000) have integrated hardware support for external time sources: GPS antenna and IRIG-B (analog and digital timing I/O) interfaces. These interfaces are ...
This how-to is a step-by-step quick start guide to help you in setting up IOx on IE3400 industrial ethernet switches and running a simple docker container via CLI. Introduction With the introduction of IOS-XE 17.2.1 all variants of IE3400 and IE3400...
This document helps the user deploy Cisco Edge Intelligence on Cisco Gateways, configure the gateways to support EI in IOX and assist the user in building an environment to demo the capabilities of EI for both monitoring Modbus (TCP or RTU) and OPC-...
This how-to is a step-by-step guide to create and configure an app for IOx on IE3400 which can monitor traffic flowing through the switch. Introduction IOx on IE3400 offers the capability to send a copy of any traffic flowing through the switch to a...
This how-to is a step-by-step guide to create a simple docker container which can run on IOx on IE3400. Introduction Unlike Catalyst 9300, which has a x86 (more specifically: x86-64) compatible CPU, IE3400 runs IOx apps on an ARM Cortex-A53 CPU. The...
This how-to is a step-by-step guide to create and configure an app for IOx on IE3400 which can monitor traffic flowing through the switch. Introduction IOx on IE3400 offers the capability to send a copy of any traffic flowing through the switch to a...
* Generate a Webex Teams Bot and retrieve the Access Token * What is a Bot and How do I create a Bot: https://developer.webex.com/bots.html* Create a new Webex Teams space or use an existing space; then add the created Bot to this space. * In...
Symptoms EFM broker connection to upstream EFM server is failing. You have confirmed that the IP connectivity to the destination port number (tcp/443 by default) is open, yet the connection does not establish from the EFM broker to the EFM server. Y...
Symptoms With EFM 1.7 release, some previous warnings are now treated as errors, hence ParStream does not start via Systemctl Diagnosis Check the /var/log/parstream/server-xxxx.log file You might see errors like: ERROR-77082: Number of maximum f...
Q. Where can I find the Cisco Kinetic DemoKit Setup Guide? A. Refer to the "Cisco Kinetic Demo Kit Guide" on Salesconnect (https://salesconnect.cisco.com/#/program/PAGE-10238 then under the "Demo Kit" tab) Q. Where can I get support for the DemoKi...
This example shows ICPAM integration to VSM 7.12 Principal of operation: SENSOR_CONNECTOR will connect to ICPAM & register the callback endpoint. Currently SENSOR_CONNECTOR is registering endpoint for all types of events available in ICPAM.Whenev...
Symptoms You have confirmed that EFM is running, and you can open a broker connection using port 8080 or 8443 from the EFM server. However, from an external broker, not hosted on the same machine, the connection is refused. Diagnosis Is this is yo...
There are a couple of ways to connect EFM with DCM: DCM DSLinkUsing MQTT DSLink The MQTT method is outlined here. Install and start MQTT DSLink on EFM node From dataflow editor page: Configure the MQTT link to connect to DCM name<Any ...
EFM v1.6.1 IOx application now supports passing parameters via GMM. This capability now enables configuring an upstream broker for that EFM node via GMM UI. Step 1: Install EFM 1.6.1 IOx app within GMM Step 2: Deploy this app on a gateway (The upst...
Why do we need Edge Data Processing? EFM is based on open source DSA Project DSA Architecture Broker Highlights * Transparent multi-hop routing between message brokers* Reliable and flexible data delivery between nodes* Runs at the edg...
