Hello,we have a "NIM-PVDM-32=" and a "PVDM4-128=".We would like to know if, by replacing the "PVDM4-32" mounted on the "NIM-PVDM-32=" with the "PVDM4-128=", we can "transform" it into a "NIM-PVDM-128".The idea is to avoid to buy a new "NIM-PVDM-128="...
Forum Posts
I have a hunt pilot (xxx4) with Queueing enabled. It has a single hunt group. Also a single line group on the Hunt Group with a list of extensions assigned to each of our agents. Each agent's device profile uses the same DN for line 1 (xxx5), and use...
Hi I have a situation that I'm trying (and failing) to recreate. When a call is placed to a Hunt Pilot, the receiving user's Jabber shows the calling party ID and the called number (the hunt pilot number), like in the following picture. The caller is...
Resolved! Calling Party Transformation Help
I was able to configure a DN "\+15552223333" and a corresponding Calling Party Transformation to make its outbound Caller ID display as "5552224444" on both internal (CUCM 88XX phones) and external (cell phones). When I try to do the same thing with ...
possibly a unique position here. but:I had UCM (dedicated instance) with local gateway in Australia. this has been working well for some time.I am migrating users to Webex Calling, utilising the same gateway. I am using the same outbound dial-peer ...
How can I search and find Extension Mobility and Jabber devices with no user assigned?I need to find Extension Mobility and Jabber devices for which the Active Directory users have been disabled.I need to do this to manage unused devices in Call Mana...
Dears,I am setting up 2911 voice bundle cme with CME-SRST-25 right-to-use license, with the IOS version c2900-universalk9-mz.SPA.152-1.T, and I received the CME 25 seats paper license notification.When I do a 'sh license detail' I see the cme-srst fe...
Hellooo, Please I need help to resolve an "Invalid user" issue. The calls are not successful "debug ccsip messages **************** May 5 17:26:06.677: //615/000000000000/SIP/Msg/ccsipDisplayMsg:Received:SIP/2.0 200 OKVia: SIP/2.0/UDP 172.16.30.9:5...
We're in the middle of phone migration project. The goal is to migrate all services from one existing CUCM cluster to a newly built one.So far, we finished moving partial of phones to the new cluster. What are left,PRI/Voice Gateway is still on old c...
Resolved! BLF shows # instead of handset icon
Hi, I configured BLF, which is working fine. But 8800 and 9800 Phones do present a # letter. 7900 (SIP ) present a handset icon. Subscribe calling search space seems correct. Did I miss a configuration part for the 8800 or 9800? Attached is a S...
Hello to all, Please I need help to resolve an "Invalid user" issue. The calls are not successful. I cannot identify the problem. "debug ccsip messages **************** May 5 17:26:06.677: //615/000000000000/SIP/Msg/ccsipDisplayMsg:Received:SIP/2.0...
Good afternoon, I have a client's CP-7841-9k phone with firmware version SIP78XX_10_3_1_12, and I need the latest update. They don't have a contract with Cisco, so they can't download the updates. Could you tell me how I can purchase the updates, sin...
Hi,I have been given on of these older phones. I have successfully loaded the SIP firmware. It is picking up its SEP<MAC ADD>.cnf.xml file. Some questionsCan I use this as a standalone, i.e. without the need to fetch the config from the TFTP serve...
Resolved! Hunt group numbers order is not right
Hi, cucm version 12, created line group with 3 numbers (A, B,C) then hunt list then hunt group . User complained that order when someone calls is not A, B, C but B, A, C . I did check route plan report and I see user is right, Route plan report sho...
Hi AllI have a cop file installation problem which is conntuniously installing so how can we cancel it ? admin:utils system upgrade cancel iscocm.preUpgradeCheck-00024.copCanceling the upgrade. Please wait...Installation of a Cisco Options Package (C...
