Hi, I have recently been asked to explore the possibility of automating telephone account creation in Cisco Call Manager, using scripting. Now although my scripting knowledge isn't great, one idea that was suggested was the use of .csv files? Any a...
Forum Posts
I have CUCME 14.1 running in a test environment for learning. I purchased an account with a SIP trunk provider that has 3 separate "lines":sip-uacredentials username 17772324654 password 7 1437534F496548072B3C202E075343 realm callcentric.comcredentia...
Hi, I have configured a VG410 48 port gateway for use with CUCM. The CUCM cluster does not support the VG410 as an SCCP gateway so I have configured it as a SIP device and pointed a CUCM SIP trunk to it. Calls seem to work ok but after a seemingly ra...
Resolved! license non-compliance
We have an issue where our system is out of compliance due to one account being an enhanced plus account when we shouldn't have any. Two phones are assigned to the problem user, but when I try to remove one of the phones to anonymous or another user ...
My customer has CUCM ver 11.5 and I need to add several new Translation Patterns (TPs). From BULK there is not an option to add/update TPs. So I understand the procedure is this on ( I appreciate ANY correction or answers from doubts) I will EXPORT ...
Hi We have a customer where we have this error: log4j:ERROR Failed to flush writerAnd we see:Disk/active 14154188K 1177904K 12814772K (92%)Disk/inactive 14154188K 899256K 13093420K (94%)Disk/logging 49573456K 0K 49557072K (100%)So the problem is with...
I have a CUCM version 15.0.1.11900-2 I have two 8861 wireless phones. They work calling everywhere inside to a lan connected phone, outside to the PSTN but if you call between the two 8861 wireless devices there is NO audio. Codecs look fine , hold ...
Hello, We have a Ribbon device acting as an SBC between CUCM and MS Teams. On the Ribbon, there is a call forking feature, which means that when a call comes from MS Teams, the Ribbon forks the call—sending one leg to CUCM and another to the MS Teams...
The calls are dropped after 12 seconds with cause code 127 INTERWORKINGUNSPECIFIED Our CTI application is handling calls transferred to CTI route point, the call is answered, media connection is established and we use RTP stream to play a prerecorded...
On CUCM version 11.5 the internal numbers use 4 digits ( XXXX) and they belong to partition "PTinternal". We need calls transferred from UNITY Auto Attendant to range from 7701 to 7799 go directly to their voice mail (without ringing) ONLY from 9:30a...
Hi All,I would like to configure the Cisco Call Manager to send logs to the Nxlog Server on the network. Can you please guide me on the same? Thanks
Resolved! Translation Rule
Good Morning/Afternoon AllJust need help with translation rule. I will need to translate number coming in from PSTN to a 5-digit number internally starting 8xxxxPSTN number- +44..........Translated to 5-digit internal extension - 8....Does the below...
I have an ATA192 that works correctly and will ring several handsets (separately or two at once with a splitter) and a loud ringer (Bedlam Siren Caller) that works fine on the UK PSTN socket, but when I connect the loud ringer to the ATA192 it will n...
Hi Team, Please advise on how to upgrade CUCM from version 11.5 (11.5.1.13900-52) to version 15.X. Is there a direct upgrade path available? If not, what are the steps for the upgrade? Thank you.
Support,With the recent update of the Cisco Jabber App version 15.0.3.309652 from the Apple store we have noticed that when we call to Cisco IP Phone Model CP9971 the user cannot see the video coming from Cisco Jabber.But the Cisco Jabber Applicatio...
