Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I had to reset this 7970 phone and reload the firmware using TFTP server on the notebook and the phone start working again when connected to the network. The problem is; the only firmware that I can loaded to this phone is the old firmware (8.0) and...
Hi all, I have 2951 router with "C2951-universalK9-mz-SPA.152-4.M3.bin" ios , my problem is that when I try to configure diap peers i am not seeing these command under "conf ter" , so any one have ide what is the probelem, please help me out for this...
The strangest thing is happening I cannot access the CME 8.6 GUI on internet explorer but it works on firefox and chrome. It just suddenly started to happen no changes were made. When I open the gui on internet explorer after I sign in it just says...
Got a customer recently upgraded to CUCM 9X. When user logs in with EM profile, the phone shows login successful but the extension never gets updated or the phone never restarts to get the profile. Any ideas why?
Brand new CCME right now i have only a basic setup with IP address mostly. I can't ping the ISM module at all. when i go into it the prompt i am at is this "ServicesEngine boot-loader>" when i try to reload it all get this loopingSRE Installation Not...
Hello,I need to BAT in a service on a large number of phones. If button #4 was a serviceURL button how can I BAT in a particular service? Thanks, Randall
Hello. I Have got CallManager version 8.0.3.(One publisher and one subscriber) and about 1500 IP Phones. We are running out of director numers.I am sure that some users have not user their phones for about 2 months or more and others are no longer pa...
Hello Guys, I've been configuring some E1 (ISDN PRI) with some information I got from the Internet, but I'm a little confused about selecting the PRI GROUP timeslots.As fas as I know, an E1 has 32 timeslots (0 to 31). TS0 is used for framing and TS1...
Our existing AD is going to be replaced by latest version of AD,All information will be same including IP address but just on a different box.Are there any steps to be performed or how can I check compatibility?
Hi there,We use the Cisco 7965 IP phone throughout our organisation. Our phones are configured such that one of the buttons to the right of the display calls up our company stock price, another auto-dials our IT department help desk. We would like ...
I am trying to get a fax server setup. The setup is:Gateway > MGCP > CUCM > SIP > Fax Server. I can get it to work if I use G.711. If I try to use T.38 the faxes fail with the error T30 Timeout T1. When looking at Wireshark on the fax server, the...
Hi, In reading info around the web, I do find and understand that any changes made to configuration of an upgraded CUCM node will be lost if they were made after upgrade but before switch-version. I was wondering if CDR files/database were also grou...
HI Is there a way to notify the caller if calling destination is on another call (busy )ccm 7.1.5phone 7911,7906,6941 Thanks
I have CUCM 10.0.1 and Windows Jabber client 9.6.1. Jabber is to be used as 'phone only'. I can use Jabber as a regular softphone just like CIPC (using PC for audio for calls), but I can't seem to get Extend and Connect to work. We don't have the...
Background:Cisco unity connection 9.1Scope:I have an external number from telco (let say 6041111111).Also I have a forwarding service on telco site which forwards all calls into the Cisco Unity Connection number (let say 6042222222).However, instea...
