Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello Experts,We have several VG204 devices configured using MGCP connected to fax machines. We are having a problem when the VG boxes are busy with a fax and a second incoming fax machine does not get a BUSY from the VG box. It rings until deciding ...
I have 2 - 2911s with 2 each NM-4VWIC-MBRD / VWIC3-1MFT-T1E1-T1 ( 4 PRIs - 92 lines)Is there any way for me to selectively choose a line to make a call out ? Dial 9 of course grabs the first available line from the back end to make a call. Thanks...
Hello colleagues, First of all, I'm extremely new to voice technologies therefore I struggle with everything. Sorry in advance for not using the terms correctly. Background info: CUCM Version: 10.5.2.14900-16 Issue: Users in the London office co...
Hello,we have an issue with hunt pilot on one server,When the Queue is full the calls get disconnect .if a hunt pilot is registered in antoher server the calls will not disconnect .my cucm 11.5.1any idea?
Hi all,I have CUCM 11.5 and an IM&P 11.5 in my lab environment, both are in the same LAN and DNS is working fine. I have two error messages when I run the system troubleshooter - Cisco Sync agent and SIP Publish model. Screenshot attached. The Cisco ...
Hi,Please help to configure Expansion module cisco 7915 with IP Phone 7962.I can not see (Device>Phone) Menu in CUCM to add the Expansion Module.Would you show me how to ? (Please see my screenshot in attach file)
Hi, I have created 2 new subscriber last week and start monitoring over Real Time Monitoring Tool, after a few days i realize that "virtual memory usage"of both are higher than threshold ( other 3 manager that i had don't exceed the threshol). I sea...
HiWe have implemented a SIP Trunk to PSTN recently for the first time. We have problem in our incoming calls that do not establish. How can I translate in PSTN number to internal directory number in cucm?Thank You
Dear all,am having cisco router 2921 with cme upgraded to 11.0 and sip phones 3905 with latest firmware (CP3905.9-4-1SR2-2).please go through my below issues which i hope to be solved.1- Some IP phones(3905) get i think hanged, when i try to dial any...
Hello all. I was wondering if anyone knows what features may be lost when using a generic SIP phone with Cisco Callmanager? Our company is looking at possibly going with Polycom phones but I do not know what features may be lost if we choose to go ...
Hi Friends,i am facing protocol application invalid erroe in cisco 7940 sip configuration ip phone. can any one help me to solve the issue.
Hello engineers!First of all, thank you for your help.I am not very familiarized with VoIP implementations or configurations, so I would like to know how can I transform or redirect an incoming call from a number of the PSTN to an internal directory ...
Hello We are planning to implement Cisco Jabber and our actual infrastructure with CUCM Version 10.5.2 works with pure IP, I mean, all servers are configured with IP Adress and not with the Host Names. Now, we have to change this and of course, the D...
Greetings, I want to connect siemence HI-path 4000 exchange to our data network via Cisco 3800 router. and hope to use the network to forward voice traffic to other end.we have both sides Cisco 3800 routers with VWIC2-2MFT-T1/E1 cards.Kindly ask how ...
Hi Folks, Need quick suggestion on the dtmf method usage for the below call follow: PSTN >> PRI >> VG >> MGCP >> CUCM >> SIP Trunk >> CUBE VG supports - OOB CUBE supports - RFC2833 DTMF on SIP Trunk configured as: No Preference: Will the trunk ut...
