Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have a group of users. They have their own individual extensions on their phones. These extensions are also in a line group for their "group" phone number (Hunt Pilot). When the user's are on a call using their extensions (on calls unrelated to...
Hi, Call Manager can connect the Jabber application to the Cisco Instant Messaging and Presence Server. AD authenticated users having issues authenticating. Kindly advice.
Hi All, I have a problem that the calls from user XXX were shown with wrong display name and vice versa!This issue was solved but now it's back.When the user calls I see. The users have the same last name but different userids.One of them is an ac...
Hi again, i tried a firmware upgrade on my phone to version 1.4.8.4 which I downloaded from cisco but it seems not to work. After I choose the Tar-file from my pc it starts to upgrade and when it should be finished it starts again with same procedure...
Has anyone successfully got the Hunt Pilot Call Queuing working within UCCM Version 11.0, I have followed the instructions to the letter, but cannot get my Greeting to play. I can get all of the standard greetings to play without any trouble at all,...
When Installing Cucm (Cisco Unified Communications Manger) What Do I Put Down For Static Network Configuration Like What Ip Address?
Hi Experts, I have Cisco ISR4321, CUCME v11.0, with 1 E1 controller, and 2FXS/4FXO Ports.All my SIP Phones works perfectly, and the Analog Phone for FXS Port can call the Local IP Phones, and receive the calls from local and the PSTNbut, it can't mak...
Hello Friends, getting the below error while tracing SIP Logs.. not sure what is the issue.. sip/2.0 503 service unavailable reason q.850 cause=47 and SIP/2.0 500 Internal Server Error Reason: Q.850;cause=63 HQ CUCM- publisher and subscriber- Ext...
Does DND supersede the TIme Schedule in CUCM 10.x
Ä customer is trying to call numbers to ukrain, but all the calls are failing.When I debug in the mgcp gateway I i'm getting"a " Cause i = 0x8283 - No route to destination " When the customers calls to other countrys it works fine.Seems it only happ...
So Im the Helpdesk Mgr and Ive been tasked with finding out what this refers to and how we can remedy it. I use Cisco Unity and Call Manager from a purely administrative perspective. What exactly consumes a prime license? What are some tricks to free...
I'm trying to install cucm sub and im & presence sub . over wan but facing error
Dear All, I have 3 wireless phones which are registered to CUCM 11.x and working fine but the problem is when I dial out among these phones (meaning extension to extension) I am experiencing 10 -13 seconds delay in calling. May someone please help me...
Hi, I have been asked to configure QoS on our router for voice traffic. The link is 1GB and the request is for 4.8Mb EF and 200kb AF31 traffice to be configured. I have only ever had to configure traffic for one dscp before, setting up an ACL with ...
Hello, when someone calls me on one of my 2 Cisco 7925 wireless phones, they show message "network busy" I have another Cisco 7921 (same phone number but newer) which seems to be ok with completely same settings. What could be the problem? see pic ...
