cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
249
Views
0
Helpful
6
Replies

Help with 7965G for SIP standalone

astro4000
Beginner
Beginner

I am currently using Grandstream HT802 for 2 SIP (3rd party) phone lines. Will the account info that I currently use work with this firmware for the 7965g? I do not want to use asterisk if possible also. Also not sure what to do with pumpkin... no info what to do, I have loaded it but...?
I just want the 7965 to connect to switch or router direct without any interface such as asterisk.
I want to be able to program the SIP settings I currently use in my HT802 to the 7965.

Question is how to program the 7965?

6 Replies 6

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

Start by searching in this forum for "SEPmacaddress.cnf.xml" and Asterisk.  

I am lost on what to do. I searched, found but doesn't tell me. I do not want to use asterisk either. I have pumpkin but what to do with it. I see sip on this set but no access to make changes. I am familiar with grandstream programming HT802, but wish to set up the 7965 on its own so I can plug into my network or other home network. To be self contained so to speak.

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

To get this to work, you will need the following: 

  1. A known working SEPmacaddress.cnf.xml template.  I have a known working SEPmacaddress.cnf.xml for a 9971 (LINK) and it will have no problem working with a 7961.
  2. TFTPd64
  3. DHCP Option 150
  4. Dial plan
  5. Phone firmware

I have saved those files. THe 7965 setup appears to be "Locked" so no manual entries possible. I believe I need pumpKIN to connect to the phone. At the moment, I have the phone powered up by a PEO switch which is connected to my main sw and router.

I see the IP is 192.168.1.83 and subnet & gateway is correct showing on the screen in setup. Thats as far as I get.
I see Unified CM as one choice showing LAN IP and other choice is SIP but no lines indicating a sip registration url, id and pswd,
Thats all I got so far, Oh and pumpKIN running on a laptop to my network wireless.

POE  (spelling)

Currently screen shows Unprovisioned.  I managed to unlock the settings but that is not really programmable.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers