How to configure CMR in Gateway

[pandiarajan.it21]

According to the link 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/7_1_2/cdrdef/cdradmin/cdrcallinfo.html we can take two fields as common between Gateway CMR and call manager CDR. globalCallID_callManagerId and globalCallId_callId.

How to configure cisco ios gateway to generate CMR?

Actually I am trying to get the globalCallId_callId from CMR of gateway to map globalCallId_callId from CDR of CUCM.

Thanks,

Pandian

[Manish Gogna · Accepted solution]

Hi Pandian,

For CDR config on the ios gateways the following document is followed

http://www.cisco.com/c/en/us/td/docs/ios/voice/cdr/developer/guide/cdrdev/cdrcsv.html

It does not mention anything separately about cmr but the cdr configuration will need to be done as per the above.

HTH

Manish

[pandiarajan.it21]

Thanks Manish,

To clarify, only CDR can be generated from gateways and not the CMRs correct?

-Pandian

[Manish Gogna · Accepted solution]

Hi Pandian,

Yes, that's what i could make out from the available documentation and guides. If someone knows a way to configure the cmr on gateways using any Cisco or third party solution they can reply to this post.

Manish

[pandiarajan.it21]

Thanks a lot Manish...