Locale Installer for 8845 on CUCM 9.1(2)

[mcaldogne]

Hello!

I have alredy install the first 8845 on a CUCM 9.1(2) and, after the installation of device package cmterm-devicepack9.1.2.14103-1.cop.sgn, I can find the 8800 serie under device default on the CUCM admin GUI, but....the IP-Phone "can only english".

My question is: can I install the locale installer po-locale-it_IT-k3-10.3.2.1000-1.cop.sgn on CUCM 9.1(2), more precisely 9.1.2.11900-12?

In Docwiki will recommended to  "apply the latest Locale Installer release that matches the major.minor version of CUCM":

http://docwiki.cisco.com/wiki/Cucm-phone-locale-installers#What_Version_of_Locale_Installer_should_I_apply_when_I_upgrade_my_CUCM.3F

However in the redme of the  locale installer version 10.3(2) I found the following information: "Cisco Unified Communications Phone Only Locale Installer k3-10.3.2.1000 is intended to be installed on any version of Cisco Unified Communications Manager which supports Cisco IP phone firmware 10.3.2".

http://www.cisco.com/web/software/282074291/127666/po-locale-10.3.2.1000-2_ReadMe.pdf

Thanks in advance for your help.

Mirko

[Ayodeji Okanlawon]

I dont see an issue with this. The device pack you have installed has the "10.3(2.16)" firmware for the 8845. So this locale is valid.

[mcaldogne]

OK, the installation of the locale installer was successfull.

Thank you for your reply!

[jcarlos.castillo]

Hi, I want to add a new phone 8845 in CUCM 9.1.2, but I dont know how to do that. could you please help.

[R0g22]

Not to sound rude but don't hijack threads. Please open up a new one and some one would be glad to answer your questions. Do include the call agent - CUCM or CME along with System versions.