10-07-2015 05:17 AM - edited 03-17-2019 04:30 AM
We need to upgrade CUCM 9.1 to latest version, during [SOFTWARE Upgrade -> INstall/upgrade] the MD5 value is missing please let me know can we proceed with installtion.
If we upgrade without MD5 check, what will me the risk. Please advice.
10-07-2015 05:30 AM
Hi ,
You should get the MD5 value.
Once u go to Software Installation/Upgrade, select the iso patch and in Download Status, u would get message Checksumming the file followed by Screen showing MD5 value,version info and Switch version option.
Please check.
regds,
aman
10-07-2015 05:31 AM
Hi.
If it lets you to install, go ahead without issue.
On release 10.x you will need to apply a cop file to support newer MD5.
HTH
Regards
Carlo
10-07-2015 05:39 AM
We are upgrading CUCM 9.1 to latest version, download file size is right.
In the CUCM software upgrade process, I am able to see the upgrade ISO files, but MD5 value is missing, please let me know do we have any risk in this upgrade, please advice.
10-07-2015 05:46 AM
Pior to uploading iso, u can verify the checksum using any MD5 checksum utility and compare with MD5 available on cisco site.
But I have never seen like this.
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide