Hi,
I have a strange issue with sip normalization scrip. Customer want to change diversion header using with sip normalization script but same time they want to use refer-passthrou scrip on sip trunk .
Is that possible to use following script single file ?
#### refer-passs###
--[[
This script is used to trigger REFER pass through. The following conditions
must be met in order for the REFER to be passed through:
a. The inbound REFER must be in-dialog
b. The Refer-To header must not contain an embedded Replaces header
c. The other call leg must be a SIP Trunk
d. The endpoint represented by the other call leg must support REFER
If any of the conditions above are not met, the REFER is processed locally by
Cisco Unified Communications Manager.
--]]
M={}
function M.inbound_REFER(msg)
-- the message should have the following headers
local to = msg:getHeader("To")
local referto = msg:getHeader("Refer-To")
local referredby = msg:getHeader("Referred-By")
if not to or not referto
then
return
end
-- see if the Refer-To header contains an embedded Replaces header
if referto:upper():find("REPLACES")
then
-- pass through is not supported if the Refer-To contains an embedded Replaces header
return
end
-- see if the REFER is in-dialog
if not to:upper():find("TAG=")
then
-- pass through is not supported for out-of-dialog REFER
return
end
-- this is an in-dialog REFER without an embedded Replaces header; pass it through
local pt = msg:getPassThrough()
if pt
then
pt:addHeader("Refer-To", referto)
if(referredby)
then
pt:addHeader("Referred-By", referredby)
end
trace.format("Passing through inbound REFER")
end
end
return M
####diversion-header####
M = {}
local mask = scriptParameters.getValue("Diversion-Mask")
function mask_diversion(msg)
if mask
then
msg:applyNumberMask("Diversion", mask)
end
end
function M.outbound_INVITE(msg)
mask_diversion(msg)
end
return M
