07-19-2012 03:38 AM - edited 03-16-2019 12:16 PM
Hi,
I have a polycom IP phone, I have registerd it to CUCM 7.1 do you know wheter it supports client matter codes because currently it does not work..
Thanks in advance,
Solved! Go to Solution.
07-19-2012 05:56 AM
FAC/CMC are not supported on third-party SIP devices. These features are only supported on some Cisco SIP devices.
Here is a link to the related thread on the Cisco Support Community:
https://supportforums.cisco.com/thread/2136144?tstart=0#3580443
Hailey
Please rate helpful posts!
07-19-2012 05:56 AM
FAC/CMC are not supported on third-party SIP devices. These features are only supported on some Cisco SIP devices.
Here is a link to the related thread on the Cisco Support Community:
https://supportforums.cisco.com/thread/2136144?tstart=0#3580443
Hailey
Please rate helpful posts!
07-19-2012 06:06 AM
thanks Hailey
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide