Hi All,I am configuring snmp v3 user in ISE 3.3 patch 3 using below command and getting below message while configuring pass and priv pass. In ISE 3.3 cli reference guide it says that minimum length for password is one character but in cli it saying ...
Hello, does Cisco ISE solution work with Captive Portal Detection Option 114 to modernise the Captive Portal Detection process on Apple iOS Devices that support iOS 14+ see below Apple article: https://developer.apple.com/news/?id=q78sq5rv On the Cis...
I enrolled juniper devices and allot in Cisco ISE, but i notice there is no logs for tacacs command accounting. but all of our cisco devices showing logs history of commands inputted. please help
Does anyone know what the current setting is for a 802.1x switch port configuration for the switch for a Meraki Access Point? Is it a configuration similar to A or B below (a regular trunk port for an Access Point). I have been B but not sure how i...
Hi, Our customer wants to integrate Cisco ISE with Azure AD, and they want to use AutoPilot to autoprovision the computers. But how can we authenticate and authorize a computer that dont have anything? If we integrate with Intune this will work? Envi...
Hey Guys, I have a question regarding conditions, and I didn’t find anything about it in the documentation. When we create a condition like calling-station-id, there are multiple options, such as starts with and begins with, which I understand. On...
Hello Guys, We have a project that migrates SNS ISE (physical appliance), and I would like to know if there is any possibility of migrating the users that were created by the sponsors? We did not consider this step, and I am thinking that after acti...
Hi;Consider the following scenario:Here is the configuration applied under the interface:The client boots up and successful authenticates by 802.1X:Now, the verification steps:Why the switch applies the highlited ACE from its point o view.My current...
Dear Cisco ISE lover, I have one lab which issue with ISE v3 P8 to utilize visibility with Zabbix.Along the ways, we test with SNMPwalk on Zabbix server as below: => snmpwalk -v3 -u name -l authPriv -A name -a SHA -x AES -X name 10.6.1X.XAnd result i...
Hi, We have changed the admin certificates on a 4 nodes ISE deployment. (1PAN, 1SPAN, 2PSN with v3.1) We performed the operation in the following order: PSN1, PSN2, SPAN, PAN, waiting each time for the services to be up. When changing Admin cert on t...
Hello,We intend to integrate ISE with with Microsoft Intune MDM. all of documentation i have seen, You have to register ISE as an application in Azure AD and use certificates for authentication. I have two questions in my mind if anyone has an answer...
Bug information:Symptom: Currently ISE checks for Product Name or system-product to contain KVM in the dmidecode output for the ISE to be installed and if not, it won't allow installation with the error Unable to find Cisco UDI information. This is a...
Hello everyone. I'm trying to make a Regex to match some specific hostnames in one authorization policy, but not managed to do it sucessfully. Here are the conditions, tried witch Matches or Starts With, but no success.Also validated the REGEX with P...
Hi all;When configuring EAP authentication methods on the Windows-based supplicant, one of the possible options is to choose your desired Trusted Root Certificate Authorities. Right?My question is that, why choosing any trusted certificate in this bo...
I am running ISE 3.1 patch-5 on SNS-3655 and for the past two weeks, I am getting these messages via email every hours from the ISE:- Smart Licensing Authorization Expired: Details=AuthorizedPeriodExpired.- Smart Licensing Id Certificate renewal fail...
