Cisco ISE 3.3 Policy Set Monitoring Feature

[PaulLagatta4907]

I created a couple policy rules and selected the Monitor feature.  After applying the changes, I am not seeing any hits on the rules I created.  I found in old forums the monitor feature really doesn't work.  The customers were using 2.4 at the time of the posts.  Can anyone confirm the Monitor option is still flaky in the new versions.  We are running Cisco ISE 3.3 Patch 3 on SNS-3655-K9 appliances. 

Thanks, Paul

[PaulLagatta4907 · Accepted solution]

The monitor feature works.  Although I don't see hits on the Policy Rule Page, if I review the details of a client, ISE shows the rules the client matches to include rules set to monitor.

[thomas]

Unclear what your rules were and "it doesn't work" does not help anyone reproduce your results.

See How to Ask The Community for Help 

[PaulLagatta4907]

I wasn't asking anyone to reproduce my results; I was asking was the monitor option still questionable.  I found the solution to the problem.  If one views the details of an endpoint, it clearly shows all rules the endpoint will match on to include rules in monitor mode.