whatever I do, I either can't get authenticated or get authenticated on the data vlan.
here is the relevant switch configuration:
aaa group server tacacs+ Greataaa group server radius U-turnaaa authentication dot1x default group U-turn
aaa authorization network default group U-turn group Great local
interface GigabitEthernet1/0/28 description Experiment switchport access vlan 24 switchport mode access switchport voice vlan 23
authentication port-control auto authentication host-mode multi-domain authentication violation protect dot1x pae authenticator spanning-tree portfast spanning-tree bpduguard enableend
here is the freeradius configuration which causes authentication on the data vlan:
anybody works for a money loving Government which instead of upgrading acs or getting ise forces to innovate with free radius?
Any idea what the correct attributes are or the how to configure this?
Go to Solution.
The secret has been unmasked!
not the "=" and the ":=" accordingly
View solution in original post
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: