cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
628
Views
1
Helpful
4
Replies

ISE 2.2 patch 5 and CSCve82240 bug

harrzhan
Cisco Employee
Cisco Employee

experts

In the ISE 2.2 Patch 5 release note, this bug is fixed. However, my customer still hit the same bug when trying out on patch 5 released on mid-Dec.

Checking on the bug note, I see that the bug was in version 2.2.0470, fixed in 2.2.0905. We are informed that these two are all the same patch 5 version: 2.2.0905 is 2.2 Patch 5. 2.2.0470 is the FCS build version.


I am really confused at this point.


1 Accepted Solution

Accepted Solutions

Yes that’s correct

But you’re still running into the bug. Do you have a case to explore why that’s happening?

You should be looking through the tac to troubleshoot

View solution in original post

4 Replies 4

Jason Kunst
Cisco Employee
Cisco Employee

Do they have a tac case to investigate and correct discrepancies

The TAC engineer is telling us the 470 and 905 are the same code for patch 5.

Yes that’s correct

But you’re still running into the bug. Do you have a case to explore why that’s happening?

You should be looking through the tac to troubleshoot

There are many builds culminating in final release.  The FCS number of 470 is the last build used for FCS.  After FCS, patches are flagged using 90#, where # is the Patch version.

Yes, be sure to work with TAC to determine if truly hitting same issue or new issue.