Network Management

Hello, i want to deploy some configuration changes with prime infrastructure only on "access ports". has anyone an idea how to do this with a cli template? I have tried to deloy it with the "IntfName" variable, but this includes every interface on th...

Hi! I have two standalone Cisco Prime.. i.e. Both were as primary and secondary.. but on primary server the database has been corrupted. At this moment, I have OLD Prime as secondary (active) and NEW Prime also as secondary...  My questions is: how t...

 Hi All,I recently upgraded our Cisco ASA 5545 to version 9.9(2)36.  Since the upgrade we are not able to transfer files to/from our Azure tenants via the site to site vpn we have setup.  Here is an example:  vpn, tunnelLocal Server: 10.1.1.151Azure ...

Hi, I'm currently on Cisco Prime 3.2.0. I have tried suppressing the alarms generated in Prime by creating an alarm policy. I have selected the switch models, the port group type (access ports) and event type as 'Link down (includes flapping). Despit...

HelloI have been stuck for a few days. I would like to find a solution to my problem through the help of someone from the forum. Thank youI installed Cisco CCP V2.8 to manage the system's devices. CCP is loading well, but does not discover any device...

Hi, what are the differences between the two configurations and are they considered mutually exclusive:   flow record BB-FLOWRECORD match ipv4 destination address match ipv4 source address match transport destination-port match transport source-po...

We just had a security audit and they told us that some of our switches still had vstack enabled. Models: WS-C3560X-48 WS-C2960CG-8TC-L   I am trying to understand why this would be, as I had previously added the command 'no vstack' to all switches. ...

Hi, Can someone please advise on the most appropriate QoS configuration to be used on a Catalyst switch port (3560, 3650,3750 etc)   My scenario is: Wireless mobile client devices used for Data and Voice applications connect to one of multiple SSID's...

Hi folks I'm hoping this is a quick question. I've to audit the available switch ports around the office to see if we need additional equipment (there's probably plenty patched not in use) and document VLAN associations etc... Show VLAN ID is pretty ...

Hello,I was wondering, how to create, save, and run a TCL script on Cisco c4500 [Cisco IOS XE] performing a traceroute and saving the output to txt file. Thanks,

Our Devices including acc, dist and core has almost all snmp traps enabled. My concern is if enabling all traps will have affect on network performance. Shall I only enable the traps that we need or shall I keep all traps enabled. What is the best pr...

%ASA-4-733100: [ x.x.x.x] drop rate-1 exceeded. Current burst rate is 9 per second, max configured rate is 10; Current average rate is 17 per second, max configured rate is 5; Cumulative total count is 20831 Can someone explain me what is the meaning...

Hello! I want to create a policy for search unwanted, undesirable commands. Example, I have an ACL: ip access-list standard ACL_TEST 10 deny any   If anyone adds here a some command, example, like this ip access-list standard ACL_TEST 5 p...