Hello, We have Cisco spaces with a connector setup, after 3 month from the implementation we found the DNA Spaces connector token is expired. We can regenerate it but is it normal to generate the token every 3 month?
Forum Posts
We are experiencing recents issues where clients (MS Win 7 PCs) are not 'taking' the IP address being given to them via DHCP. Our routers are configured with 'ip helper-addresses' that point to DHCP servers. I ran 'debug ip udp' and 'debug ip dhcp se...
We have encountered a strange issue with our ASR 1001x routers. We use RESTCONF to add IP's to a blocklist object group. Recently we had to remove an IP from that blocklist. In the CLI, we do not see the IP. However, when we run a GET method usin...
HI All,I configured an IP SLA on the cisco 8200 router and it's been tracked.Once the track goes down I want email to be intiated.Below is the EEM script for thisevent manager environment _email_to Team@domain.comevent manager environment _email_serv...
Resolved! Role-Based user CLI configuration
Hello,On our C9300 switches, I would like to create a user that can only change the operator users password. I learned from user guide that I can use CLI View to do this. Could someone have feedback and give me an example ?Another method is to use pr...
Hi,I need to configure Netflow:On multiple imterfacesBoth directionsDo I need one 'monitor' per interface/direction? For example, Monitor0_in for g0/0 ingress, Monitor0_out for g0/0 egress. Then the same logic for other interfaces.
Resolved! Help with DHCP
Hello!I need some help with configuring a DHCP Server.Here's the topology:I want to access the DHCP Server so all the laptops and PCs (such as "Jani PC") could request an ip address from it.Is there a way to do this? Static routing and VLAN on the fi...
Hi,we used to download running-config from ASA firewall on remote server using command:scp user@ASA_IP_ADDRESS:system://running-config running-configand I'm certain it worked with some older version of ASA. Now the firewalls are updated to 9.20(2)21...
Dear Cisco Community,I am currently working on a critical deployment of Cisco Nexus 9000 series switches, and I need some guidance regarding the NX-OS 9.3.13.bin image. Our team is encountering issues while attempting to upgrade to this version, and ...
Hi Everyone, After replacing the IE3000 switch with the IE3300, the SSH connection stopped working despite identical configurations. However, changing the subnet from 255.255.255.128 to 255.255.255.0 restored the SSH connection. This behavior is quit...
This is just for your information as I spent some time with this because I could not find info googling around. Problem:High CPU for 12 to 50 seconds (range 50 to 100%) caused by SNMP engine process when router was polled/discovered.This caused SNMP...
Good day everyone, to meet emerging requirements I am attempting to configure in a lab PKI login, via SSH, to Cisco IOS. I am using information from various Cisco sources but most are similar to the below. Test configuration is also below and PuttyCA...
I have a question in configuration the MP-VRF-MPLs scenario when I configure the scenario in site to site of P2P is easy because you configure the RTs for source and des and configure it in the other side in opposite site but in different scenario ...
Hello every one, I have a big issue with drops on some interfaces in swithes C9200 L. Can someone help me with this please? AMS-MX-CL-CPA1-MDF1-SW03#show interfaces gigabitEthernet 1/0/22GigabitEthernet1/0/22 is up, line protocol is up (connected)Har...
Resolved! CLI Auvik user for a WLC 9800-L
Hi Guys! Recently we are implementing Auvik in our environment, we want to create a user to unblock some features of this Auvik tool.But, since our WLC have configured ISE, it always attempts to authenticate with it, should be create this service auv...
