Solved: Re: Is there a MIB for IOSv routers?

SupportEngJohn · ‎12-18-2019

Does anyone know if there exists a MIB for IOSv routers? I tried looking in the MIB locator, https://mibs.cloudapps.cisco.com/ITDIT/MIBS/servlet/index, but can't seem to find one.

John

Francesco Molino · ‎12-18-2019

Hi

IOSv is simply the virtualization of IOS and used in Virl software (or others like EVE, GNS3...).
Personally I didn't do any snmp walk but it should be the same as standard IOS. You probably won't have access to all OIDs but the most important should be there.

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

View solution in original post

Francesco Molino · ‎12-18-2019

Hi

IOSv is simply the virtualization of IOS and used in Virl software (or others like EVE, GNS3...).
Personally I didn't do any snmp walk but it should be the same as standard IOS. You probably won't have access to all OIDs but the most important should be there.

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

iacobansilviu1 · ‎02-16-2024

Francesco is right.. To view to mib on the iosvl3 router issue: show snmp mib