monitor cpu on cisco cbs 220 switch

[ayashour]

hi when i add custom cpu sensor for the switch i got no object found 

i did try adding OID Value : 1.3.6.1.4.1.9.6.1.101.1.7.0 (worked in cbs350)

and also 1.3.6.1.4.1.9.9.109.1.1.1.1.5.1 (worked on c2960x)

but they did not work 

what is the OID Value for the switch CBS220

[marce1000]

 - Could be due to lack of functionality versus the higher model (cbs350) ; check if the OID is available in 
                           https://software.cisco.com/download/home/286327420/type/283965836/release/2.0.2.8

 M.

[ayashour]

i think the functionality is fine because i can find the cpu utilization in the gui interface 

[marce1000]

- That does not mean it is available as such in the MIBS , check the
content of the link I posted.

M.

[Joseph W. Doherty]

Ditto.