cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3559
Views
10
Helpful
10
Replies

punt cause policer drop packet cause 7

Hello Techies,

I am facing sudden p2p down issue where i have advertised all my ip pools between cisco ASR and juniper router.

Checking the log I found below logs 

%IOSXE-5-PLATFORM: F0: cpp_cp: QFP:0.1 Thread:076 TS:00014740836682289247 %PUNT_INJECT-5-DROP_PUNT_CAUSE: punt cause policer drop packet cause 7

I am expecting this as known bug in OS.  

Current version: 16.09.02 on cisco asr

Is there any solution to this??

10 Replies 10

Hello,

I could not find any related bugs. Can you post the output of:

show platform hardware qfp active infrastructure punt config cause 7

hi below is output

hardware qfp active infrastructure punt config cause 7
QFP Punt Table Configuration

Punt table base addr : 0x48848010
punt cause index 7
punt cause name ARP request or response
maximum instances 1
punt table address : 0x4884802C
instance[0] ptr : 0x4884903C
QFP interface handle : 2
Interface name : internal0/0/rp:0
instance address : 0x4884903C
fast failover address : 0x4882D064
Low priority policer : 12
High priority policer : 13

show platform hardware qfp active infrastructure punt config cause 7

do this and you will know the reason  

Hi Below is the output

hardware qfp active infrastructure punt config cause 7
QFP Punt Table Configuration

Punt table base addr : 0x48848010
punt cause index 7
punt cause name ARP request or response
maximum instances 1
punt table address : 0x4884802C
instance[0] ptr : 0x4884903C
QFP interface handle : 2
Interface name : internal0/0/rp:0
instance address : 0x4884903C
fast failover address : 0x4882D064
Low priority policer : 12
High priority policer : 13

 

If there issue with arp how to find the affected interface then?

Thanks and Regards

I am getting a similar log entry on a ISR4331 running 16.12.05... I show the interface in question in the log message for me though


%PUNT_INJECT-5-DROP_PUNT_CAUSE: punt policer drops packets, cause: arp (0x7) from GigabitEthernet0/0/0.401

Not sure why arp is getting punted.. curious as to why

Hello,

hard to find anything on this...I wonder if the policer drops it. Can you post the output of:

#show platform hardware qfp active statistics drop

two reason :- 
A- you have windows server that send ARP to all host and it hit the ASR 
B- you connect to router that use interface instead of next-hop in static route, this lead to router send arp for all IP. 

MriduD
Level 1
Level 1

I have a similar issue

 

Mar 27 04:58:34: %IOSXE-5-PLATFORM: R0/0: cpp_cp: QFP:0.0 Thread:000 TS:00004110625087911280 %PUNT_INJECT-5-DROP_PUNT_CAUSE: punt policer drops packets, cause: unknown-encap (0x3) from Vlan1..

 

Plz advise.

Punt table base addr : 0x409A8010
punt cause index 60
punt cause name IP subnet or broadcast packet
maximum instances 1
punt table address : 0x409A8100
instance[0] ptr : 0x409A8D10
QFP interface handle : 2
Interface name : internal0/0/rp:0
instance address : 0x409A8D10
fast failover address : 0x40989864
Low priority policer : 70
High priority policer : 71

Hi,

Such issue caused by network looping issue, i have faced similar from ISP
but later rectified and they looped network, try to analyse your
traffic when issue arises
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: