Network Security

Engage with peers and experts on network security topics such as FTD, FMC, FDM, CDO and ASA.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hi guys, I have a backup server, which should backup the router configuration files securely for a list of routers. My colleagues applied this in Juniper but unfortunately am unable to figure it out on Cisco routers. The requirement is as follows: I ...

mjtabbara by Level 1
  • 20133 Views
  • 6 replies
  • 1 Helpful votes

Hi there...I am really hoping someone can shed some light on a way to get past this issues below.I have an ASA5512-X with ASA 8.6(1)2For the outside, I have 2 of the NIC ports configured as 'redundant' with multiple subinterfaces, each with their own...

I have a 2901K9 router at a remote location. Insite Interface = 10.10.10.1/24 Outside Interface = 20.20.20.1/24I have set "no ip directed boradcast" on both interfaces. ( I think it's the default settings)But still when I ping 20.20.20.255 I get a re...

avilt by Level 3
  • 4890 Views
  • 7 replies
  • 0 Helpful votes

Hi All,As per attached network diagram I have 2 firewall connected to L3 switch. Since specific route is present already I am nt able to route same specific route to other firewall.PBR cannot be done in ASA. So how can I fix this issue?

Hello..I have recently upgraded software to 8.4(3) and the issue we are facing with our video conferencing. Our VC is on DMZ and natted static with public ip, also any-any ports are open from DMZ & outside. But when we dial VC through public ip then ...

Anukalp S by Level 1
  • 291 Views
  • 2 replies
  • 0 Helpful votes

Dear All,We're managing two appliances as indicated.We would like import a "custom" list of banned hosts.Does IPS appliance have this capability ?.If Yes, someone can give me some information how to accomplish it ?Thank you all in advance.B. Regards....

Review Cisco Networking for a $25 gift card