Network Security

Engage with peers and experts on network security topics such as FTD, FMC, FDM, CDO and ASA.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

i bought a pix 515 to play with and i upgraded it to the farthest release 8.0(4) it was at 7.22 and the web interface and ASDM is not working.  do i need to upgrade the ASDM?  when i run the launcher i get a fatal error : handshake_failure.  i just u...

                   Hi ,We have two L2 switches and 2 ASA firewalls, We have to use firewalls in Active standby mode.We want to terminate our internet connections to L2 switchs, then to firewall.Can we do this or how we can configure this.

Resolved! ACL Hit Counts

ACL hit countsHi,I jsut needed to clarify something, i have a data Center & branch Office connected to each other through IPSec VPN. I also have SSL-VPn configured on the firewall in my data center, the same firewall on which the IPSec VPn from my br...

Hi all,   I am new to logging in the IOS.  Fairly new to ZFW too, but have set up ZFW to block all internal sytsems from sending through port 25, except the mail server on the LAN.  This is to help stop a spambot which I am trying to identify.  As ty...

cluovpemb by Level 1
  • 2866 Views
  • 7 replies
  • 0 Helpful votes

Hello,I have an issue with a firewall, there are servers and load balancer behind my firewall that need to reach a host in the internetthese are the rules:acl permit tcp X.X.X.X Y.Y.Y:Y 8406  (this works ) but using the IP not the hostname (in this c...

i want to ask about asa 5510 i connect the asa with two pc ( one act as inside and the other act outside ) and i configure the asa put the problem is .. i cant ping the inside pc from outside and vise versai tride many thing that i read in cisco webs...

So I have a client with an ASA 5520 running version 9.0 (was on 8.4) that I am trying to get either IPSec or SSL VPN configured on.  I got everything setup and tried to connect.  However, I couldn't connect to either.  I fired up the real time monito...

deyster94 by Level 5
  • 2784 Views
  • 5 replies
  • 0 Helpful votes

Hi thereI can't telnet from a host(Ubuntu 12.10) in our DMZ to an outside MX on port TCP 587. Inspection for ESMTP not enabled. Port 587 enabled for host in DMZ to any.Anyone has an idea why ? Best RegardsDavid                  

Review Cisco Networking for a $25 gift card