Network Security

HelloThe problem is that DHCP-Relay is not working over the VPN. I want the remote site to get there IP-addresses from the local site from the DHCP server. Here I can give extra options and DHCP-reservations with it. The VPN is working when I work wi...

Hello,I'am using ASA5510 and I configured a VPN IPSEC. When I connect to the vpn with a windows client ( using windows vista) , I have access to the network ressources but when i want to go on the Internet it doesn't work. (particulary with Internet ...

Hi CSC,Is there a way to extract which traffic is hitting which rule from syslog? Thanks.Rgrds,Benson

I have created a  site to site tunnel with range 10.x.x.x Now i want to creat a site to site tunnel with same range range with same policies as created with first tunnel ,with other far end peer ip.Will this creat a problem .

Hi,I alreay have smartnet contract for my IPS. Now, I need to do auto upgrade my IPS signatureWhile i was doing, it ask me to activate license key. How to get the license key for my IPS?Regards, CT

I know there has to be a way to filter the logging on the ASA CLI. The "sh logging" command is obviously all logs on the ASA but i would like to filter the logging based on perhaps a source IP or dst ip or port. I can do this in the ASDM using the lo...

I'm trying to find this in the software center, but no luck. We have an old PIX 501 whose configuration I'm trying to convert to an ASA 5505. Any thoughts?              

Hi all.I am testing dhcprelay but when a follow the bellow doc everything works fine but when i change the DHCP server from IOS to windows server 2003 does not work.http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008075...

Hello All,I have a  source dynamic NAT rule in place to translate all traffic from INSIDE (sec-lvl 100) to PRIVATE DMZ (sec-lvl 80) with translation to a specific new source IP (not the IF IP):nat (fw-inside,fw-prv) source dynamic GRP_NAT_INSIDELAN N...

Hi We have a Cisco 5505 ASA fireawll at a remote site. I can get the firewall to issue the IP addresses to the pc's, Is there a way for the pc's to get their IP addresses directly from our DHCP server?RegardsJay

hi out thereDo some have some realistic performance numbers for a ASA 5505 on a mixed setup with local internet breakout and site to site vpn ( and please - don't tell me 150 mbps 3des throughput on a 100 mbps ethernet ;-) - what can be expected in a...