Hi Team, How to find the IFINDEX interfaces for Cisco ASA 5506, my NETFLOW Analyzer only shows IFINDEX names. Regards,Antony Xavier
Hi Team, How to find the IFINDEX interfaces for Cisco ASA 5506, my NETFLOW Analyzer only shows IFINDEX names. Regards,Antony Xavier
Hi all, i am new with ftd and fmc and also new in the Firewall i dont have any experience thats the reason that i need your help from lan side i have a trunk port with allowed vlan 10,11 and i use portchannelthe ftd will be transparent , how i can co...
Troubleshooting configuring SNMPv3 via API Explorer and CLI in FTD 6.7/ASA version 9.15(1) Snmpv3 server and FTD can ping each other. Have verified more than once credentials and algorithms are all correct and match between the two hosts.Anyone else ...
Hi Community, I hope you can help me with this config.I have an inside SFTP server 192.168.2.82 running on tcp port 20000I would like to limmit the bandwith, so it not taking up all up and download.Initially I have a:access-list SFTP extended permit ...
I'm using ASA 5506X with FTD and i'm managing the ASA with FDM i'm not using FMC to manage my ASA. I want to configure failover between two ISP through Firepower Device Manager (FDM) but i'm unable to see any option to track the interface for going d...
I have a main 2504 wireless LAN controller and a backup. I see that it is possible to configure security systems. Knowing nothing about it, I didn't touch anything. What security do you recommend to put in place?Thanks
Dear all , what command is for "show ip interface brief" for ASA 5510
Hi All, Our organisation brought 2 ISA-3000-4C-FTD to install in our network. I have not worked before on such product can anyone help me on my below query 1) Can we configure this device same like we do for normal Cisco FDM/FTD devices. if not are a...
URL Reputation for one my major site got changed to Questionable. As we Block websites with “Questionable” reputation, this site got blocked in our firewall. After 2 days I see from talos it is changed to "Neutral" What are the catalyst changes...
Hi, When some config change was made at switch or router, if we want to see the change record, where should we see? in Radius or TACACS ISE? Second question: If just typing command with saving or without saving config, what difference of the two we c...
I am currently trying to make this whole situation make sense... Our HQ has a pair of ASA 5545-Xs in Active/Active that handle Internet Access for our HQ/Remote Office(s), as we currently use a default route all over that points back to these firewal...
Hello, I am evaluating Cisco Security Manager 4.17.0. The Manager is installed on one server and I am connecting to it via the client installed on another server. When I attempt to authenticate after installation, I receive the following: Erro...
I configured my Firepower chassis mgmt IP (the IP on the mgmt port) via initial configuration wizard. I need to update that IP but I can't seem to find any way to do it in GUI or CLI. If I go to interfaces, there is no edit option on the MGMT port. I...
Here is my situation. I need to route my guest traffic out a secondary ISP. I need my normal traffic to route out my primary ISP so I intend to use PBR to accomplish this. Does the below config look like it will accomplish this task?I have kept ou...
Hello Experts @Richard Burts @balaji.bandi @Marius Gunnerud @Rob Ingram @Marvin Rhoads @Giuseppe Larosa @Aref Alsouqi @Mohammed al Baqari I am looking for options for 2nd factor authentication on Cisco ASA Any Connect VPN Connectivity? Plea...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-14-2024 04:24 AM | ||
06-14-2024 03:09 AM | ||
06-12-2024 10:19 AM | ||
06-12-2024 08:28 AM | ||
06-11-2024 12:13 PM |
User | Count |
---|---|
10 | |
6 | |
6 | |
6 | |
4 |