Hello,I have am using FMC and FTD version 7.2 and I have a working configuration using SAML authentication. I'm trying to add Certificate authentication, but I'm having a problem validating the certificate installed on my client machine. First a coup...
Forum Posts
Resolved! Cisco Firepower Base Licenses Issue
I am using Cisco Firepower 1120 in High Availability without FMC. Customer did not purchased additional license license like URL, VPN etc etc. So I think base license covers basic functionality like inferface configuration, NAT etc etc. Customer does...
I have two Firepowers in two remote offices and i have two ISPs in each office, i had configured vti ipsec vpn between two offices but they are working with static routes, can i configure dynamic routing protocols for failover vpn? I tried to configu...
I have a Cisco FPR-2140 firewall , the firewall is running an ASA system. I need to enable 3DES-AES on this firewall. Since the firewall is not connected to the network, I chose the Smart License Reservation method to enable 3DES-AES. But when I ente...
Hi,one of our FPR-2120 stopped working tonight. It doesnt boot any more.Current image running: Boot ROM1Last reset cause: LocalSoft (0x00000002)DIMM_1/1 : PresentDIMM_2/1 : AbsentPlatform FPR-2120 with 16384 MBytes of main memoryBIOS has been success...
I'm new to FMC/FTD and I'm looking for ways to search for activity to/from a specific IP. I tried searching in Connection Events but it came up empty. Suggestions will be appreciated.
Just upgraded the Lab FMC from 7.2.1 to 7.3 and now have a Smart License Monitor alert. Specifically, it says 'Smart Agent is not registered with Smart Licensing Cloud'. If I look at the Smart License Status on the FMC, it says Authorized and Regis...
Cisco's Customer Experience (CX) Research is trying to learn more about customers experience with Cisco support cases and managing faults. If you are interested in talking about your experience with how you manage support cases and faults, please tak...
FYI: This new release posted this week adds some new features and resolves over 500 bugs https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/720/threat-defense-release-notes-72.html#c_new-features-fmc-726
Hi Team,We need to configure NAT timeout value for traffic going from Inside interface to Outside interface on Cisco ASA firewall.Please let us know how we can achieve this? As i dont see any document for NAT timeout value but for overall timeout val...
Dears Please confirm the attached diagram flow will work with IPS inline mode, My goal is to inspect traffic before it reaches to server in DC , Device A is capable of redirecting traffic to IPS interface 1 on vlan 20 through switch after traffic i...
Hi colleagues, I have the following issue, I'm migrating from cisco ASA5510 to FRP1010e managed via FDM. The configuration is simple and I moved it to the new device(FRP1010e). I have configured one interface for OUTSIDE with public address and VLAN ...
Hi Guys, i have this issues "Smart License usage is out of compliance." ... what is the solution of this error Thanks !
We have run into an issue with an ASA5516-X device where we cannot issue new deployments. All deployments fail, creating an entry in pigtail deploy like this:NGUI: 04-01 19:59:51 ajp-nio-8009-exec-5: ERROR ExceptionHandlerAspect:48 - Managed NGFWApp...
how deep do I need to lear about Zone-Based Firewall . on the book OCG on page 435 and 436 , it is just have page. on the Domain 2.0 I don't find it . but yet on the exam I have couple question about firewall. any advice
