Network Security

hello friend,l am having problem with cisco secure ACS 5.7.  l have installed it on vmware and is going fine but if l try to installed the license l got from cisco l keep getting this message."License file installation failed : The license file faile...

Hello, I have configured Safe Search using SSL and Access control polices. It works well, but with Google Search, I can disable Safe Search and do a search, whereas with Bing, Yahoo tested, I can't? Any idea why Google let me disable it? Disabled uns...

Hello Experts, I am am setting up an asa 5508 in transparent firewall. Created a BVI interface and join two inside interfaces to bridge. I am after to create an ACL that can permit only one host  per  interface  Interface BVI  44ip add 10.1.1.3 255.2...

I have a FTD2130 HA pair running firmware 6.4.0.1. I have some public facing servers configured with 1to1 static NAT rules on the FTD and associated Access Control Security Policy rules, for example:Source Server#1 192.168.100.100, destination ANY <-...

Hello - I have ASA5506 configured as BVI - I have tried to setup the anyconnect through the ASDM but I’m getting nat error please see the attached snapshot from ASA,, i have tried to add nat (inside,outside) 1 source static but still getting the same...

Does the Cisco ASA have a user-id feature as in Palo Alto? Can you see the assoiation of user ip adddress and user names in the secrity/traffic logs? Thanks Stan

HiAnyone got any idea why when i look at the Live logs on ASA 5555x they are all yellow and saying blocked obviously lots of traffic does get blocked but services were working so dosent make sense.??? Thanks

All,I have an ASR920 for internet routing. Management interface is on the inside and I have an ACL applied to lines 0-5 on VTY and applying to that Mgmt-VRF. This is working just fine for internal management access. I would also like to allow VTY acc...

Hello, I need a guide here. What is the best practice and the correct way to implement Firepower Policies/rues? We currently have the Firepower in production with no policies in place (all traffic passes through the Firewall without any inspection). ...

hi guys,slight confusion on Cisco NGIPS high availability and clustering.My devices are Firepower 4125 with fxos and planning to run FTD on it.Total 4 devices - 2 in DC and 2 in DRCan i do Active-Passive failover with devicessome documentations menti...