This firewall does not have FirePower or any other services. It is just the ASA itself. I need to verify some security requirements and I can't find cisco documentation that states if this is a default configuration or how to change/verify it myself...
Hello all, I am having a strange issue with virtual FMC which is managing ~10 FTD firewalls (some of them being offline at the moment) - if I display connection events I see all of them as expected....however if I search for events matching specifi...
Dear all, We have ASA firewall which we have admin access (ssh and asdm) via TACACS+ servers in ISE (10.7.1.17, 10.7.1.18) We configured the following on the ASA: Today we performed an upgrade on the ISE and we rebooted the 10.7.1.17, for around 6 mi...
Hi Guys, We have one pulblic ip address and two web server located in DMZ zone. We want to configure load balancing or load sharing for server availability. Kindly suggest how can we configure load balancing for web servers on ASA 9.6 without any lo...
Hi, I have a firepower 4110, Can someone guide me that which version of FXOS is supported for mentioned FTD version 6.2.3.13?
Hi, We need to setup an FMC on a different subnet than the FTD management interface so I will configure the gateway on this interface to reach the FMC. At the same time, the management interface will be connected to the same network than the producti...
Im trying to restrict access through my ASA from several countries. When I test the ACL using my IP I lose ping ability and access to resources as I should. However I can still ping the outside interface and initiate an anyconnect connection. access-...
Hi, Can we get feature on FTD2120 NGFWs for PAN Regex pattern recognition.This is what need to enable. Can this be done through IPS ????
I am adding a ACL rule on ASA, but when I do that, it goes at the bottom after the deny statement, the only way I can move rules is using ASDM So, how can we do that using in cli when adding rules before deny statement- All the line number before 186...
I was able to get this going after a few packet captures and figured out the issue.
I'm not sure if this is answered somewhere in the docs that I missed. If it it, I'm sorry. I have two questions in relation to my ASA5506-x appliance and firepower: 1. I don't currently have the URL license since I'm not interested in the cloud based...
I added a few URL's to the Global-Blacklist-for-URL in FMC.Now I get too many connection events with reason "URL Block" Is there a setting turning off this type of event?
Can I reboot my FMC at any time without affecting my FTD's? This would be in a production environment and I don't want to have any disruption of service, Internet, etc...... Thanks
Hi support, i Have my Cisco asa running with dhcp to distribute clients ip addresses. i have a mail server and to reach the mail server by name, i configure host on every pc (laboury) can asa acting as internal dns to resolve the name? Regards
Hi All, I need to create a port forward on our public IP on a Cisco ASA to antoher site which has a Cisco Meraki MX. I need to access a service behind the LAN on the Meraki side but from the public IP of the ASA. There is a vpn tunnel between us and ...
