Solved: Re: Steps and impacts during ASA FTD 5516 UPGRADING FROM v6 to v7 - Page 2

amralrazzaz · ‎10-30-2023

I have Firewall model Cisco ASA5516-X Threat Defense with IOS software version 6.6.5.1-15 and ill do upgrade to IOS version Cisco_FTD_Upgrade-7.0.1-84.sh.REL.tar so i need help to get the correct steps to follow in sequence and also my question about upgrading from V6 to V7 what are the impact ill face ?

will setting and current configurations be lost during the upgrade ? if yes , then what shall i do ! if i took back from v6 shall it be worked after upgrade to restore the configurations or i have to reconfigure it from scratch !?

will Smart net and base license will lost during the upgrade!?

amr alrazzaz

amralrazzaz · ‎11-02-2023

admin@EGCAI01-Firepower:/ngfw/var/log/sf$ dir
Cisco_FTD_Hotfix_DA-6.6.5.2 VDB_update_info.txt last_update_info.json sru-2022-03-28-001-vrt
Cisco_FTD_Patch-6.6.5.1 current_cancel_status.log policy_deployment.log sru-2023-10-25-001-vrt
Cisco_FTD_Upgrade-6.6.5 current_update_status.log policy_deployment.log.1.gz ts_results
Cisco_FTD_Upgrade-7.0.1.1698924488.rollback db_manage.log policy_deployment.log.2.gz upgrade_status_api_stack.log
Cisco_FTD_Upgrade-7.0.1.1698934812.rollback fdm_upgrade_status.log policy_deployment.log.3.gz vdb-4.5.0-336
Cleanup_23.11.02_11.08.56.log ftd-upgrade-stack.log policy_deployment.log.4.gz vdb-4.5.0-353
Cleanup_23.11.02_14.01.09.log geodb-2022-03-28-002 prev_vdb-4.5.0-336_logdir__20211221_112725.tgz vdb-4.5.0-374
GeoDB_update_info.txt geodb-2023-10-05-100 sru-2020-08-18-001-vrt verify_file_integ.log
SW_update_info.txt initial_setup.log sru-2021-05-03-001-vrt verify_signature.log
admin@EGCAI01-Firepower:/ngfw/var/log/sf$

amr alrazzaz

amralrazzaz · ‎11-02-2023

admin@EGCAI01-Firepower:/ngfw/var/log/sf$ dir ls -l /var/log/sf/
dir: cannot access ls: No such file or directory
/var/log/sf/:
total 864
drwxr-xr-x 11 root root 4096 Dec 21 2021 Cisco_FTD_Hotfix_DA-6.6.5.2
drwxr-xr-x 11 root root 4096 Dec 21 2021 Cisco_FTD_Patch-6.6.5.1
drwxr-xr-x 13 root root 4096 Dec 21 2021 Cisco_FTD_Upgrade-6.6.5
drwxr-xr-x 11 root root 4096 Nov 2 11:28 Cisco_FTD_Upgrade-7.0.1.1698924488.rollback
drwxr-xr-x 11 root root 4096 Nov 2 14:20 Cisco_FTD_Upgrade-7.0.1.1698934812.rollback
-rw-r--r-- 1 root root 23 Nov 2 11:08 Cleanup_23.11.02_11.08.56.log
-rw-r--r-- 1 root root 23 Nov 2 14:01 Cleanup_23.11.02_14.01.09.log
-rw-r--r-- 1 www www 50 Oct 29 23:06 GeoDB_update_info.txt
-rw-r--r-- 1 www www 45 Dec 21 2021 SW_update_info.txt
-rw-r--r-- 1 www www 39 Mar 30 2022 VDB_update_info.txt
lrwxrwxrwx 1 root root 92 Nov 2 14:20 current_cancel_status.log -> /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/cumulative_upgrade_rollback.log
lrwxrwxrwx 1 root root 79 Nov 2 14:20 current_update_status.log -> /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log
-rw-r--r-- 1 root root 1867 Nov 2 13:58 db_manage.log
-rw-r--r-- 1 root root 8687 Nov 2 14:20 fdm_upgrade_status.log
-rw-r--r-- 1 www www 100621 Nov 2 14:01 ftd-upgrade-stack.log
drwxr-xr-x 3 root root 4096 Mar 30 2022 geodb-2022-03-28-002
drwxr-xr-x 3 root root 4096 Oct 29 23:06 geodb-2023-10-05-100
-rw-rw-r-- 1 root root 0 Jan 10 2021 initial_setup.log
lrwxrwxrwx 1 root root 80 Nov 2 14:20 last_update_info.json -> /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.json
-rw-rw-r-- 1 www www 276774 Nov 2 14:20 policy_deployment.log
-rw-rw-r-- 1 www www 320 Oct 28 15:40 policy_deployment.log.1.gz
-rw-rw-r-- 1 www www 367 Oct 22 15:33 policy_deployment.log.2.gz
-rw-rw-r-- 1 www www 312 Oct 14 15:02 policy_deployment.log.3.gz
-rw-rw-r-- 1 www www 363 Oct 8 14:47 policy_deployment.log.4.gz
-rw-r--r-- 1 root root 261819 Dec 21 2021 prev_vdb-4.5.0-336_logdir__20211221_112725.tgz
drwxr-xr-x 2 root root 4096 Jan 10 2021 sru-2020-08-18-001-vrt
drwxr-xr-x 2 root root 4096 Dec 21 2021 sru-2021-05-03-001-vrt
drwxr-xr-x 2 root root 4096 Mar 30 2022 sru-2022-03-28-001-vrt
drwxr-xr-x 2 root root 4096 Oct 29 23:34 sru-2023-10-25-001-vrt
drwxr-xr-x 2 root root 4096 Nov 2 14:03 ts_results
-rw-r--r-- 1 root root 22219 Dec 21 2021 upgrade_status_api_stack.log
drwxr-xr-x 5 root root 4096 Dec 21 2021 vdb-4.5.0-336
drwxr-xr-x 5 root root 4096 Mar 30 2022 vdb-4.5.0-353
drwxr-xr-x 3 root root 4096 Oct 29 23:16 vdb-4.5.0-374
-rw-r--r-- 1 root root 5374 Nov 2 14:22 verify_file_integ.log
-rw-r--r-- 1 root root 73402 Nov 2 13:58 verify_signature.log
admin@EGCAI01-Firepower:/ngfw/var/log/sf$ ls -l /var/log/sf/

amr alrazzaz

Marvin Rhoads · ‎11-02-2023

The log in your most recent rollback folder would be the one to look at. Your directory output shows it as a symbolic link:

current_update_status.log -> /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log

amralrazzaz · ‎11-02-2023

admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ dir
000_start 800_post error_gui_msg.ext ims.conf-from-new-rpms status.log var_files.log
200_pre DBCheck.log etc.before ims.conf.from-preinstall system_snapshot_at_failure.log
300_os bailout.log failed.log main_upgrade_script.log upgrade_rollback.log
475_schema_downgrade cumulative_upgrade_rollback.log finished_kickstart.flag maint_state upgrade_status.json
500_rpms error_exit flags.conf pmtool_status_0 upgrade_status.log
600_schema error_gui_msg http_enable rpm_log_dir var_dirs.log
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ cd ^C
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ cd upgrade_status.log
bash: cd: upgrade_status.log: Not a directory
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ dir upgrade_status.log
upgrade_status.log
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ cd upgrade_status.log
bash: cd: upgrade_status.log: Not a directory
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ cd 500_rpms
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/500_rpms$ cd upgrade_status.log
bash: cd: upgrade_status.log: No such file or directory
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/500_rpms$ dir
001_clean_up_ddd.sh.log 107_restore_sftunnel.sh.log 200_remove_snort.sh.log 500_install_files.sh.log
100_install_rpms.sh.log 108_restore_iptables.sh.log 201_install_snort_dynamic_preprocessors.sh.log 550_configure_mysql.pl.log
100_restore_configs.sh.log 110_generate_dbaccess.sh.log 210_backup_gwt_files.sh.log 800_update_slackpackages_ftd.sh.log
101_install_fsic.sh.log 111_restore_connector_config.sh.log 215_update_mysql.sh.log
105_restore_symlinks.sh.log 111_restore_connector_config_FMC.sh.log 216_update_monetdb.sh.log
106_restore_SFDC.sh.log 200_remove_dynpre.sh.log 300_examine_vmware_tools.sh.log
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/500_rpms$ ^C
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/500_rpms$

amr alrazzaz

Marvin Rhoads · ‎11-02-2023

/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log

...is a text file. Please share that.

Note - your posting of entire directory listings as rich text in the replies makes them very hard to read. Please learn to use the "Insert/Edit code sample" button in the reply dialog box or else attach lengthy text output as a plain text file.

Marius Gunnerud · ‎11-02-2023

When upgrading any system you need to get used to reading the release notes. These tell you exactly how to upgrade and if you can go directly to a version or if you need to jump to one version before going to the final version.

https://www.cisco.com/c/en/us/td/docs/security/firepower/70/relnotes/firepower-release-notes-700/upgrade.html

Also, FTD underlying OS is Linux based so use Linux commands. Preferably extract the /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log file and share it here. Optionally you can use "less" without the quotes to read the file in the CLI.

--
Please remember to select a correct answer and rate helpful posts

amralrazzaz · ‎11-03-2023

this is what i got for the same path

admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ dir
000_start 800_post error_gui_msg.ext ims.conf-from-new-rpms status.log var_files.log
200_pre DBCheck.log etc.before ims.conf.from-preinstall system_snapshot_at_failure.log
300_os bailout.log failed.log main_upgrade_script.log upgrade_rollback.log
475_schema_downgrade cumulative_upgrade_rollback.log finished_kickstart.flag maint_state upgrade_status.json
500_rpms error_exit flags.conf pmtool_status_0 upgrade_status.log
600_schema error_gui_msg http_enable rpm_log_dir var_dirs.log
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ cd upgrade_status.log
bash: cd: upgrade_status.log: Not a directory

admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/500_rpms$ dir
001_clean_up_ddd.sh.log 107_restore_sftunnel.sh.log 200_remove_snort.sh.log 500_install_files.sh.log
100_install_rpms.sh.log 108_restore_iptables.sh.log 201_install_snort_dynamic_preprocessors.sh.log 550_configure_mysql.pl.log
100_restore_configs.sh.log 110_generate_dbaccess.sh.log 210_backup_gwt_files.sh.log 800_update_slackpackages_ftd.sh.log
101_install_fsic.sh.log 111_restore_connector_config.sh.log 215_update_mysql.sh.log
105_restore_symlinks.sh.log 111_restore_connector_config_FMC.sh.log 216_update_monetdb.sh.log
106_restore_SFDC.sh.log 200_remove_dynpre.sh.log 300_examine_vmware_tools.sh.log

can you be more specific if there are more command to write to get the output because only this what i got !!!

amr alrazzaz

Marvin Rhoads · ‎11-03-2023

As @Marius Gunnerud and I both mentioned yesterday, the file /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log is what we need to see.

Turn on logging all output in your ssh session and then, as root user in expert mode cli, please type the following:

cat /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log

Stop your logging and then open the resultant log file in a text editor on your computer. Select all the text and then paste it into your reply here using the </> icon to insert / edit code.

amralrazzaz · ‎11-03-2023

check this output : (note: the upgrading cancelling at 57% same as what shown below and on screenshot!)

admin@EGCAI01-Firepower:~$ dir /var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback
000_start error_gui_msg pmtool_status_0
200_pre error_gui_msg.ext rpm_log_dir
300_os etc.before status.log
475_schema_downgrade failed.log system_snapshot_at_failure.log
500_rpms finished_kickstart.flag upgrade_rollback.log
600_schema flags.conf upgrade_status.json
800_post http_enable upgrade_status.log
DBCheck.log ims.conf-from-new-rpms var_dirs.log
bailout.log ims.conf.from-preinstall var_files.log
cumulative_upgrade_rollback.log main_upgrade_script.log
error_exit maint_state
admin@EGCAI01-Firepower:~$ ^C
admin@EGCAI01-Firepower:~$ dir /var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log
/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log
admin@EGCAI01-Firepower:~$ cd /var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log
bash: cd: /var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log: Not a directory
admin@EGCAI01-Firepower:~$ tail -f /var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/upgrade_status.log
TIMESTAMP:Thu Nov 2 14:11:17 UTC 2023 PERCENT:52% MESSAGE:Running script 800_post/450_remove_httpsd_age_log .sh... TIMEREMAIN:19 mins
TIMESTAMP:Thu Nov 2 14:11:18 UTC 2023 PERCENT:55% MESSAGE:Running script 800_post/720_update_devices.pl... TIMEREMAIN:18 mins
TIMESTAMP:Thu Nov 2 14:11:22 UTC 2023 PERCENT:55% MESSAGE:Running script 800_post/780_remove_future_flagsco nf.pl... TIMEREMAIN:18 mins
TIMESTAMP:Thu Nov 2 14:11:24 UTC 2023 PERCENT:55% MESSAGE:Running script 800_post/805_install_geolocation.p l... TIMEREMAIN:18 mins
TIMESTAMP:Thu Nov 2 14:11:25 UTC 2023 PERCENT:55% MESSAGE:Running script 800_post/810_update_ld_conf.sh... TIMEREMAIN:18 mins
TIMESTAMP:Thu Nov 2 14:11:26 UTC 2023 PERCENT:55% MESSAGE:Running script 800_post/850_clear_eula.sh... TIME REMAIN:18 mins
TIMESTAMP:Thu Nov 2 14:11:26 UTC 2023 PERCENT:57% MESSAGE:Running script 800_post/855_clean_firstboot_contr ol.sh... TIMEREMAIN:17 mins
TIMESTAMP:Thu Nov 2 14:11:27 UTC 2023 PERCENT:57% MESSAGE:Running script 800_post/870_update_fireamp_cert.s h... TIMEREMAIN:17 mins
TIMESTAMP:Thu Nov 2 14:11:28 UTC 2023 PERCENT:57% MESSAGE:Running script 800_post/880_install_VDB.sh (in ba ckground: 800_post/100_ftd_onbox_data_import.sh)... TIMEREMAIN:17 mins
TIMESTAMP:Thu Nov 2 14:19:29 UTC 2023 PERCENT:57% MESSAGE:Fatal error: The chosen certificate has already e xpired. Please apply an unexpired certificate. Error running script 800_post/100_ftd_onbox_data_import.sh. For more details see /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1/800_post/100_ftd_onbox_data_import.sh.log on the device being upgraded. TIMEREMAIN:

admin@EGCAI01-Firepower:~$ dir /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/800_post
002_unpack_gwt_files.sh.log 080_clear_temp_si_dir.pl.log 109_drop_dns_partition_tables.pl.log 805_install_geolocation.pl.log
005_extra_peer_info.pl.log 097_upgrade_ssl_inspection.pl.log 150_install_infodb.sh.log 810_update_ld_conf.sh.log
010_update_vmware_tools.sh.log 100_600_update_correlation_rules.pl.log 250_dashboards.pl.log 850_clear_eula.sh.log
011_reconfigure_model_pack.sh.log 100_700_bias_free_naming.pl.log 304_beaker_process.pl.log 855_clean_firstboot_control.sh.log
016_fix_sru_import_log.pl.log 100_700_new_user_prefs.pl.log 305_stunnel_process.pl.log 870_update_fireamp_cert.sh.log
018_fix_ruleconfigs_in_layer.pl.log 100_add_filters.pl.log 450_remove_httpsd_age_log.sh.log 880_install_VDB.sh.log
020_670_fix_users_and_roles.pl.log 100_ftd_onbox_data_import.sh.log 720_update_devices.pl.log
020_700_fix_users_and_roles.pl.log 100_remove_casuser.pl.log 780_remove_future_flagsconf.pl.log
admin@EGCAI01-Firepower:~$

How to extract content into text file !

amr alrazzaz

Marvin Rhoads · ‎11-03-2023

So the last line in the log file gives you information on why it fails:

TIMESTAMP:Thu Nov 2 14:19:29 UTC 2023 PERCENT:57% MESSAGE:Fatal error: The chosen certificate has already expired. Please apply an unexpired certificate. Error running script 800_post/100_ftd_onbox_data_import.sh. For more details see /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1/800_post/100_ftd_onbox_data_import.sh.log on the device being upgraded.

Look more deeply into the log file recommended:

cat /ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1/800_post/100_ftd_onbox_data_import.sh.log

amralrazzaz · ‎11-03-2023

Please check this file for output and hope it could help ! thanks

The chosen certificate has already expired. Please apply an unexpired certificate.
ValidationException: The chosen certificate has already expired. Please apply an unexpired certificate.
com.cisco.ngfw.onbox.importer.services.UpgradeSqliteImportService.importConfigFromSqlite(UpgradeSqliteImportService.java:190)
com.cisco.ngfw.onbox.importer.services.UpgradeSqliteImportService.importConfig(UpgradeSqliteImportService.java:134)
com.cisco.ngfw.onbox.importer.NGFWDBImporter.importConfigSqlite(NGFWDBImporter.java:315)
com.cisco.ngfw.onbox.importer.NGFWDBImporter.main(NGFWDBImporter.java:173)
Reporting error : The chosen certificate has already expired. Please apply an unexpired certificate.
Fatal error: The chosen certificate has already expired. Please apply an unexpired certificate.

amr alrazzaz

amralrazzaz · ‎11-04-2023

Thanks for support , would like to inform that issue has been resolved finally and issue was because the certificate was expired and need to be renewal and create new Self-Signed certificate with installation and then try to run the upgrade and it was working and ASA FTD has been upgraded to 7.0.1 successfully.

Useful links used for certificate creation:

https://www.cisco.com/c/en/us/support/docs/security-vpn/public-key-infrastructure-pki/215850-certificate-installation-and-renewal-on.html

https://getacert.com/signacert.html

https://www.youtube.com/watch?v=Exo6HW9c8h0&t=310s

amr alrazzaz

amralrazzaz · ‎11-02-2023

admin@EGCAI01-Firepower:/ngfw/var/log/sf$ dir
Cisco_FTD_Hotfix_DA-6.6.5.2 VDB_update_info.txt last_update_info.json sru-2022-03-28-001-vrt
Cisco_FTD_Patch-6.6.5.1 current_cancel_status.log policy_deployment.log sru-2023-10-25-001-vrt
Cisco_FTD_Upgrade-6.6.5 current_update_status.log policy_deployment.log.1.gz ts_results
Cisco_FTD_Upgrade-7.0.1.1698924488.rollback db_manage.log policy_deployment.log.2.gz upgrade_status_api_stack.log
Cisco_FTD_Upgrade-7.0.1.1698934812.rollback fdm_upgrade_status.log policy_deployment.log.3.gz vdb-4.5.0-336
Cleanup_23.11.02_11.08.56.log ftd-upgrade-stack.log policy_deployment.log.4.gz vdb-4.5.0-353
Cleanup_23.11.02_14.01.09.log geodb-2022-03-28-002 prev_vdb-4.5.0-336_logdir__20211221_112725.tgz vdb-4.5.0-374
GeoDB_update_info.txt geodb-2023-10-05-100 sru-2020-08-18-001-vrt verify_file_integ.log
SW_update_info.txt initial_setup.log sru-2021-05-03-001-vrt verify_signature.log

admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698924488.rollback$ dir
000_start 800_post error_gui_msg.ext ims.conf-from-new-rpms status.log var_files.log
200_pre DBCheck.log etc.before ims.conf.from-preinstall system_snapshot_at_failure.log
300_os bailout.log failed.log main_upgrade_script.log upgrade_rollback.log
475_schema_downgrade cumulative_upgrade_rollback.log finished_kickstart.flag maint_state upgrade_status.json
500_rpms error_exit flags.conf pmtool_status_0 upgrade_status.log
600_schema error_gui_msg http_enable rpm_log_dir var_dirs.log
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698924488.rollback$

admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback$ dir
000_start 800_post error_gui_msg.ext ims.conf-from-new-rpms status.log var_files.log
200_pre DBCheck.log etc.before ims.conf.from-preinstall system_snapshot_at_failure.log
300_os bailout.log failed.log main_upgrade_script.log upgrade_rollback.log
475_schema_downgrade cumulative_upgrade_rollback.log finished_kickstart.flag maint_state upgrade_status.json
500_rpms error_exit flags.conf pmtool_status_0 upgrade_status.log
600_schema error_gui_msg http_enable rpm_log_dir var_dirs.log

admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/500_rpms$ dir
001_clean_up_ddd.sh.log 107_restore_sftunnel.sh.log 200_remove_snort.sh.log 500_install_files.sh.log
100_install_rpms.sh.log 108_restore_iptables.sh.log 201_install_snort_dynamic_preprocessors.sh.log 550_configure_mysql.pl.log
100_restore_configs.sh.log 110_generate_dbaccess.sh.log 210_backup_gwt_files.sh.log 800_update_slackpackages_ftd.sh.log
101_install_fsic.sh.log 111_restore_connector_config.sh.log 215_update_mysql.sh.log
105_restore_symlinks.sh.log 111_restore_connector_config_FMC.sh.log 216_update_monetdb.sh.log
106_restore_SFDC.sh.log 200_remove_dynpre.sh.log 300_examine_vmware_tools.sh.log
admin@EGCAI01-Firepower:/ngfw/var/log/sf/Cisco_FTD_Upgrade-7.0.1.1698934812.rollback/500_rpms$

amr alrazzaz