cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
657
Views
0
Helpful
0
Comments
TCC_2
Advocate
Advocate

 

Introduction

%SYS-3-SYS_LCPERR3:Module X: Fatal exception occurred in Cisco Catalyst 6000 Series Switches, WS-X6348-RJ45 module reset.

Core issue

The %SYS-3-SYS_LCPERR3:Module X: Fatal exception occurred error message appears in Cisco Catalyst 6000 switches, and the WS-X6348-RJ45 module resets

Under rare conditions, some cards can reset when a link rapidly flaps. The %SYS-3-SYS_LCPERR3:Module X: Fatal exception occurred error message appears only if the link must go from down to up to down within 300ms.

Description
SYS-3-SYS_LCPERR3:Module X: Fatal exception occurred - CSCed17719

This DDTS affects the following cards:

  • WS-6248-RJ45
  • WS-6248-TEL
  • WS-6348-RJ45
  • WS-6348-RJ21
  • WS-6148-RJ45
  • WS-6148-RJ21
  • WS-6348-100FX
  • WS-X6224-100FX-MT
  • WS-X6324-100FX-SM
  • WS-X6324-100FX-MM

Under rare conditions, these cards may reset when a link is rapidly  flapping. 
The link must go from down to up to down within 300ms. This bug affects all releases of CatOS and IOS software.

Workaround:
Disable the rapidly flapping port, or remedy the root cause of the link flap.

Resolution

As a workaround to this problem, disable the port using shutdown command that flaps rapidly. Alternatively, resolve the root cause of the link flap.

Known Fixed Releases:

  • 12.1(13)E14
  • 6.4(5.11)X
  • 6.4(8.9)
  • 8.2(0.58)TFW4
  • 8.4(0.14)COC

For further assistance and support, open a service request with Cisco Technical Assistance Center (TAC).

Reference

Download software for  Cisco Catalyst 6000 Series Switches

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links