Re: Telemetry Configuration Status "N/A"

nkhawaja1 · ‎01-09-2024

Hi,

Have a Cisco Nexus Dashbaord with Insight. integrated with Cisco ACI. in the System Status Details, i see Telemetry Configuration Status "N/A"

Any idea why?

thanks

Nadeem

Ruben Cocheno · ‎01-09-2024

@nkhawaja1

Check if you meet the pre-requiments as per below doc

https://www.cisco.com/c/dam/en/us/td/docs/dcn/ndi/6x/deployment-guide/cisco-ndi-deployment-release-631.pdf

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

nkhawaja1 · ‎01-09-2024

Pre-Req are there.

Nova777 · ‎01-25-2024

I have a functioning NDI setup with telemetry and all my switches say the same thing. Doesn't seem to be much documentation on it, maybe an ACI 6.x feature?