Cisco Catalyst 1300 Switch DAC

[sunil Kulkarni]

Hello Team,

We are having Cisco Catalyst C1300-48T-4X & C1300-48P-4X switch would like to connect both using SFP-H10GB-CU3M= DAC cable for stacking. Is it possible.

[Flavio Miranda]

@sunil Kulkarni 

You can check the supported SFP on the datasheet . SFP-H10GB-CU3M= is not listed.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-1300-series-switches/nb-06-cat1300-ser-data-sheet-cte-en.html

You can also check this using  "Cisco Optics-to-Device Compatibility Matrix"

https://tmgmatrix.cisco.com/?npf=1743

[MHM Cisco World]

https://www.youtube.com/watch?v=aADaH38e_X8

MHM

[KJK99]

Any 10G port of the C1300s can be used for stacking. The SFP-H10GB-CU3M seems to be supported on the C1300s so it should be possible to use it for stacking.