4500 w/IOS

[mcoley01]

I have a Cat 4500 w/SUP IV and IOS. Is there a global way to assign multiple interfaces to a VLAN?

Doing it individually per interface is getting old.

[Prashanth Krishnappa]

You can use the interface range command

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_1_12/config/sw_int.htm#xtocid3

[Suryakant Shant]

Yes, you can assign multiple interfaces to a VLAN using interface range command. Refer to below document for ref to interface range command.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_1_12/config/sw_int.htm

[radarapu]

This can be done by using the CiscoView application. This is a graphical user intreface showing the front & back view of the chassis along with cards and ports. By invoking the CiscoView for the corresponding device , clicking the configuration, You can select multiple ports , drag & drop those ports in a VLAN. Please let me know if you need further information about CiscoView.