Good Day,I've got an older 4500 router. I'd like to upgrade the ios so that it can function as a dhcp server and implement nat.If possible, how do I go about doing this?Thank You
Hello,Quick question here we have a 2610 set up to use 2 T1's bonded for Multlink PPP with our ISP. If we unplug 1 T1 the whole bundle drops, even though the 2nd T1 is still up / up. Their IS supposed to be redundancy right?
Hi, allthese days keep thinking a foolish question, why we need WAN?differenct country's people can communicate with each other also without WAN by subscribing different service provider, then why we still need WAN?don't blame me for asking such a qu...
Environment:6500-Switch-1, switch port 2/16 connected to 6500-B port 1/1, port 1/2 vacant (active sup. slot 1, port 1/1 forwarding)6500-Switch-2 switch port 2/16 connected to 6500-B port 2/1, port 2/2 vacant (standby sup. slot 2, port 2/1 blocking)Qu...
I have several 10gb etherchannels fanning out from two 6509 core switches to some multiple 6509 distribution switches. All 6509s have Sup720 and running 12.2(18) IOS. The etherchannels are made up of 2 10gb interfaces each. The distribution 6509s ...
I have a 3640 dialup router that our sales force dials into. I already have the idle timeout command implemented. Is there anyway I can have a user timeout after a certain time even if they aren't idle? Right now I have some salesman that aren't d...
Hi,I hv a cisco 7206VXR. I would like to know what is the max number of broadcast msg (eg. AAA msg) the router can send out in a second. Can someone pls help?Thank you.
Throughout our Cisco environment there are roughly 30 or more 3500XL (makes up about 70% of my layer 2 environment). The dilemna I'm faced with is securing port 23 access to these from an administrative standpoint. We use TACACS+ for authentication...
Hi All,I have a problem with NTP when customers remotely access our network through VPN.Customers have laptops running w32time to sync their clocks with the Domain Controllers. DC's sync their clocks to the Network Management Servers (NMS) and NMS sy...
Hi,I have a scenario where there are 2 vlans on a cat 4507R running 12.2 A video source with a encoder in vlan 10 will digitize the content and send it to a receiver in Vlan 20 that has a decoder.The problem I am have is that the multicast is not ge...
Can someone exlain the relationship between casuser ID and NETMGR ID in CiscoWorks 2000? I have problem where NETMGR ID is locked out very often. I was told by Cisco engineer to reset casuser ID password when this problem happens.Thank you,Santi
I have 2 2501 I using to brush up on my Cisco skills, here is my probem on router2 I have the E0 on Router2 connected to a my network hub with E0 having an ip address of 10.10.10.30/24. From either router3 or router 2 I can ping 10.10.10.30, but if I...
I currently have a 4510 that is continuously running ESMP events and was wondering how do I turn it off. My best guess is that the redundancy feature is using ESMP to look for a second supervisor blade, but there is only a single supervisor blade in...
How do get tftp a file from rommon?It will transfer a file from TFTP to the switch but it doesn't boot to the file and the file never is written to bootflash.rommon 2 > boot cat4000.4-5-11.bin0:29.333282: Loading file 192.168.1.198:cat4000.4-5-11.bin...
I am connecting 2 locations via a DS3, but I have seperate Adtran units that will be hooked up to the DS3 itself, providing the clocking. So the routers will be hooked up to the DS3 via the Adtrans.On both sides I will have a 3550 switch connected to...
