Quick question we have a pair of 9ks with 'FEXs and I added a ports which goes to a backup server. I added it to this first 9k and when I do a show int stat it shows as connected and inactive. Is it listed as inactive because there's no traffic fl...
Situation:
Windows 10 1803 Client
ASA version: 9.4(1)
AnyConnect PKG on ASA: 4.1.08005-k9
AnyConnect Client Version: 4.5.0.4.029
I have a question about functionality. Is there a way to get AnyConnect to start, and connect to our ASA without user ...
i have an OSPF network with 3 normal areas and of course a backbone area( area 0)and one router that resides in area (2) is connected by two links to two ABR routers that connects area (2) to area (0).i tried to draw a diagram for the topology , R1 ...
I have been reading a few articles about SDN and how it will affect the job of a network administrator/engineer. Some say it will not affect the network people while some argue the jobs for network people will plunge, this has put me in a dilemma.
...
Hi All,I hope someone can shed some light on my problem :)The Situation is as follow: We have a Cisco Switch (WS-C3650-24TS) and configured netflowV9 on it. It should export the cache every 60sec to the some collector ( we will use PRTG from Paessle...
Hi,
I have the cisco switch 4948 with bellow details and i mark in red the message that are important to check.
Please advice what are the root cause at this situation and how it can be fix.
Thank you in advance for time and answer.
Regards,
Toni
...
I have a default route for the whole routerip route 0.0.0.0 0.0.0.0 10.5.1.31but for a specific subnet, 10.80.1.0/24, I want another default route. Can this be done?
We will be migrating a pair of 5ks and FEXs to a pair of 9ks and FEXs. Is there any good documentation I could refer to before tackling this? I have the gist I guess but just want to make sure everything is correct before the migration. The 9ks ha...
Hi all,
I need to build an isolated network for a CUCM migration. The CUCM ip address and gateway is in 192.168.0.0/24, but the IP of the NTP server is 10.0.0.5/24. the following is my lab connection:
ESXi host (VMs in 192.168.0.0/24)-->SW2950(al...
Hi,
Please bear with me since I don't have that much experience on the nuts and bolts of Netflow.
I want to be able to understand how many netflow packets per second can a router generate to be sent to a collector once netflow has been enabled o...
I was having trouble setting up a VPN tunnel coming from my ASA going to a cloud proxy. When I put the tunnel up I loose connectivity with my test subnets. I've gone through the config and believe it might be an acl or nat issue. Anyone care to ta...
This topic is a chance to discuss more about the Internet of Things (IoT) Management. Learn more about the strategies that involve the connectivity of smart devices, its organization, monitoring and troubleshooting functionalities. Take this opport...
