Hi,I have cisco 2600 router with two t1 from single provider.One of t1 provider's tech called and told me that my router is sending high voltage....Does this make sense? Do i have faulty interface??Thank you
Hi ,I would like to simulate internet latency between a client-serverapplication.(adding 200ms)I tried putting 2 routers back-to-back between them but the only thing ihaveavailable is two 1720 with a T1 module . And it does not add muchlate...
hi, i've implemeted dot1x several times and never have i seen this error before:00:43:02: RADIUS: Received from id 47 177.77.3.70:1645, Access-Challenge, len 10200:43:02: Attribute 79 32 015E001E00:43:02: Attribute 24 32 4349534300:43...
Dear All, I have a couple of questions about the NTP output from NTP associations detail:-1) What does "insane, invalid" mean? The server is reachable and a valid NTP sever. Command output attached2) The cisco router is attached to a the NTP sou...
I can't find information about IMA support on 4-port E1 port adapter for 85xx MSR. I see a lot of about 8-port E1 IMA PA, but no word about IMA with 4-port E1 PA.Thank you!
When I download the latst NAM upgrade, the link says I'm downloading nam-app.3-3-1.bin.gz but the actual file name is nam-app.3-3-1.bin[1].When I try to upgrade I get this error:ftp://172.18.60.6/nam-app.3-3-1.bin[1] (43857K)/tmp/upgrade.gz ...
Due to the Recent Vulnerabilities in Sun JVM. We are forced to upgrade to patched versions or remove Java from all machines.affected platforms areWindowsSDK and JRE 1.4.1_03 and EarlierSDK and JRE 1.3.1_08 and EarlierSDK and JRE 1.2.2_015 and Earlier...
Is it true that Cisco has declared 3661(AC) multiservice router obsolute? If it is true which region are they obsolute? Can a Cisco 3745 multiservice router work in place of 3661(AC). How many asynchronous serial interfaces can it have? Thanks in adv...
The following appears in a Cisco Whitepaper:____________________________________________Note: The Catalyst 6500 and 6000 MSFC2 with PFC2 (Supervisor Engine 2) and Supervisor Engine 720 with MSFC3 perform L3 switching using Cisco Express Forwarding (C...
Do any of you all have sample IOS for load balancing two ISP's (both T1 circuits) on a perimeter Internet router? And this may be a knucklheaded question, but can Cisco Express Forwarding/ospf be used to do this?
Does anyone have am experience in WAN bandwidth / transmission time calculation for PACS systems? I came across GE matrix and they do not make any sense to me. I would think it should be something like ((((<image size> + <all overheads>)/<compression...
Has anyone setup the dfm mail notifier,I read the manual and I cant get it to work.the process is running but I am not recieving an emails. thanks in advance for any replys
Is there any technical limit on how many vlans you can put on 1 hsrp group number ? We have like 65 vlans on one box 6500 msfc2 and want to put them all into hsrp group 1 , any reason why we can't do this ?
Hello:Not very familiar with VLANS. I have an HP switch cross connected to our main office and a sperate floor. At times, the port on this switch is near saturation, 90% utilization. Is there anything I can do as far as linking 2 ports (similiar to m...
