Other Network Architecture Subjects

Hello All,First time trying out the forum and figured I see if I didn't need ot reinvent the wheel. I have an upcoming project where we have a bank of 5 PPP servers connected by an ethernet segment to a frame relay link. The frame relay link carrie...

Hi I am trying to connect Cisco 2950 with Foundry FastIron via trunk . I have connected two ports from each switch and i have made the following config.But it doesnt work . Any ideas .CISCOinterface Port-channel1 no ip address flowcontrol send off! ...

The following ipv6 address can't be config on a cisco router: ::10.1.1.1/96 ::FFFF:10.1.1.1/96Someone can tell me why?

I have 110 vlanes in a 5500 that it connects for ATM against a lightstream 1010. To this lightstream also it has connected a 7200. We have problems in one of the vlanes of 5500 (vlan 67) since from 7200 doing a show ipx server I do not see the machin...

Hi, We have a Cisco Pix 515 with 100Mbps interface speed and the Ethernet 1 of the Pix firewall is connected to the Gigabit port of Cisco 3750 switch. The ftp site had been setup to ask for user name and password window to popup for authentication ...

Hi, I have a Catalyst 4006, supervisor engineer II, CatOS version 6.1(1), with a RSM Cat4232 IOS version 12.0(10)W5(18f).Well, I want upgrade to gigabit modules : WS-X4418-GB ==> 18 ports fiberWS-X4448 =====> 48 ports 10/100/1000 UTPIs there any prob...

Can anyone help in getting dialup callback working when Macintosh user connect? I've worked my way through "Configuring MS Callback Between a Router and a Windows PC" from the Cisco site and that works fine. When calling via an Apple Mac, after aut...

Hi, I just need to know how to port forward on a Cisco 828 DSL Router. After i terminal into the router, where do i go from there... I have no cisco experience, just the people that installed the router wont give support for it :| Thanks David

Currently have a remote branch with a 1760 and a T1 doing a IPSec vpn tunnel to a 3660. I would like to add a 2nd T1 on the 1760 and bond them to get 3Mbps and still maitain the vpn tunnel. What's the recommendation? Use PPP Multilink or CEF? Any con...

Cisco 3550/2948-L3 can support RPF......

Hi togehter,using an 3550 with IOS 12.1(11)EA1 as ntp server (cat1).The client, a 3550 with IOS 12.1(11)EA1 (cat2) is the most time unsynchronized.cat1 is always synchronized. in cat2 you see in the log timestamp, that sometimes you have a "." at the...

HelloI was wondering what the phrase "Call Handle failed for Modem" from debug modem and no carriers from show modem command means.Heres my show modem =MCOM firmware: 1.3.3, Modem firmware: 2.3.17, DSP firmware: 0.0.2MCOM firmware: 1.3.3, Modem firm...

Hello, I've use IOS (tm) C2600 Software (C2600-JK9O3S-M), Version 12.2(23),I've tuned DHCP Manual binding as was on the example, but th edhcp server doesn't give the IP from manual-binding pool. the config is:!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ip d...