Other Network Architecture Subjects

From the output below, you can see that on my two router network, either router can start the BGP session. The thing is, I only want one router (ATM-BB) to be able to start the session, ie open a TCP session to port 179. I dont ever want the other...

We have a single 3550-EMI a Pix 515e and 2 WAN connections (1Mbit and 3Mbit). My question is, can I use the 3550 to load balance between the two WAN connections, go to the PIX, and then come back into the same 3550 on a separate VLAN and switch for ...

I am having problems adding a couple of switches into ciscoworks. Despite having upgraded rme to the latest version with a recent idu and upgrading the ios on these switches to the same ios i have on identical switches which have been added to ciscow...

I know that SUP1A is desgined for the 6500 series switches and SUP1 is for 6000. What happen if we use SUP1A with 6000? Will we see any perofrmance issues?

HiI've this error coming on my router A where one serial interface is configured with stun encap to the router B : Nov 25 13:45:32.909: %TCP-2-INVALIDTCPENCAPS: Invalid TCB encaps pointer: 0x628276FC-Process= "STUN Background", ipl= 0, pid= 107-Trace...

Documentation states that the advantage of Multicast VLAN Registration feature is security. My question is in what way is security improved by MVR?

Hi,I would like to know, is it possible to run Works2000 in Windows 2003 server environment?All experiences are welcome.Thanks,Peter

Hello all, we currently have 2 3com switches connected over mmf fibre for a distance of approx 1km, my problem is:I have purchased 2 * 2950 switches and 2 * GBIC gigabit fibre module cards (multi mode). I am trying to swap out the current 3com instal...

Is there a way to determine the serial number of an installed SX GBIC on a 4000 and/or a 6000 with7.6(2) code?thanks